Assembly Instructions

NO
Hardware List
Q'ty
Plastic Anchors
2
2
Hook
B
A
A
Assembly Steps:
1. Drill two holes into the wall using 1/4”drill bit at the desired place you want to set the Console
and insert the Plastic Anchors (B).
2. Screw the Hook (A) into the Plastic Anchor (B). Check and make sure the Plastic Anchor (B) is
securely held in the wall.
3. Hang the metal rings onto the Hook (A) and set the Console in place.
Above hardware is packed in the plastic bag with the instruction sheet.
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a damp
cloth. Polish the finish with soft cloth and an industry recognized furniture polish