Assembly Instructions

Seven-Seas Style: EC289 Assembly Instructions
Carefully unpack all parts and identify them with parts list before
attempting to assemble the chair.
IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL
YOU HAVE COMPLETED THE FINAL ASSEMBLY.
1. Put 5 CASTERS (A) into the holes of 5 STAR BASE (B).
2. Insert GAS LIFT (C) through the center hole of the 5 STAR BASE (B),
and put the BELLOWS(D) onto the GAS LIFT(C).
3. Attach SEAT (L) to METAL PIECE (K) and BACK (I) .
METAL PIECE
(K) and BACK (I) are preassembled using SCREWS (J).
5. Attach SEAT PLATE (F) to SEAT (L) using 4 SCREWS (E)
with
FLAT WASHERS (E1).
6. Insert the pre-assembled seat unit onto GAS LIFT (C )to finish the
final assembly.
7. Be sure that all the screws are fully tightened before using.
Parts List
A. CASTERS
5
B. 5 STAR BASE
1
C. GAS LIFT
1
D. BELLOW
1
E. SCREWS(5/16”X1-1/2”)
E1. FLAT WASHERS
4
4
F. SEAT PLATE
H. ALLEN KEY
1
1
I. BACK
J. SCREWS(1/4”X1”)
1
4
K METEL PIECE
1
L SEAT
1
B
A