User Manual
CAUTION: TO REDUCE ThE RISK Of DAMAGE:
•  Avoid picking up hard, sharp objects with this product, as they may cause 
damage.
•  Store in a dry place. Do not expose machine to freezing temperatures.
•  Brushroll  continues  to  turn  while  product  is  turned  on  and  handle  is  in 
upright position. To  avoid damage to carpet,  rugs, furniture and flooring, 
avoid tipping cleaner or setting it on furniture, fringed area rugs, or carpeted 
stairs during tool use. 
•  Do not use sharp objects to clean out hose as they can cause damage.
4
D
F
E
G
D
GROUNDING
OUTLET BOX
B
A
C
GROUNDING INSTRUCTIONS
This  appliance  must  be  grounded.  If  it  should  malfunction  or  breakdown, 
grounding  provides a path  of  least  resistance for  electric current  to  reduce 
the  risk  of  electric  shock.  This  appliance  is  equipped  with  a  cord  having  an 
equipment-grounding conductor (C) and grounding plug (A). The plug must be 
inserted into an appropriate outlet (B) that is properly installed and grounded in 
accordance with all local codes and ordinances.
WARNING: Improper connection of the equipment-grounding conductor 
can result in the risk of electric shock. Check with a qualified electrician or service 
person if you are in doubt as to whether the outlet is properly grounded. Do not 
modify the plug provided with the appliance - if it will not fit the outlet, have a 
proper outlet installed by a qualified electrician. This appliance is for use on a 
nominal 120-volt circuit and has a grounding plug that looks like the plug (A) 
illustrated in Fig. 1. A temporary adapter (D) may be used to connect this plug to 
a 2-pole receptacle (E) if a properly grounded outlet is not available (Fig. 2). The 
temporary adapter should be used only until a properly grounded outlet (B) can 
be installed by a qualified electrician (Fig. 1). The green colored rigid ear, lug, or 
the like (F) extending from the adapter must be connected to a permanent ground 
(G) such as a properly grounded outlet box cover (Fig. 2). Whenever the adapter 
is used, it must be held in place by a metal screw. NOTE: In Canada, the use of a 
temporary adapter is not permitted by the Canadian Electrical Code.
2
1










