Robocom2 user manual EN.
GB IMPORTANT SAFETY REMINDERS This Robo.com2 vacuum cleaner should only be used for domestic cleaning, as described in this User Manual. Please ensure that this User Manual is fully understood before operating the appliance. Please keep this User Manual for reference. Use only consumables or spares recommended or supplied by Hoover. WARNING: Electricity can be extremely dangerous. This appliance is powered by rechargable Ni-MH batteries and is provided with a Charger Base Station.
Robocom2 user manual EN.pdf 1 6/16/2012 11:23:28 PM GB CONTENTS OF THE BOX Charger Base Station Filter** DEM O C M Mains Power adaptor Y User Manual Remote Control** CM MY CY CMY K Virtual Barrier* Multi-purpose Cleaning Brush Floor Polisher Pad Holder* Floor Polisher Pad* Edge Cleaning Brush (x2) * Certain Models Only ** May vary according to model RoboCom2Manual2011__GB.indd 2 14/07/2011 13.39.
Robocom2 user manual EN.
Robocom2 user manual EN.
GB Remote Control** 39 46 40 41 42 43 47* 49* 45 44 48 DEMO 38 38 Voice Button 39 40 Automatic Cleaning Mode Button 41 Spot Cleaning Mode Button 42 43 Arrow Buttons 44 Local Time Setting Button 45 Full & Go Button 46 Automatic Return to Charger Base Station Button 47 Scheduling Function Button* 48 Demo mode Button 49 Turbo Speed Button* 50 Battery Charge Level Indicator 51 Clock 52 Day Indicator (Scheduling Function)* 53 Automatic Return to Charger Base Station Indica
GB Packaging 30°c as this may damage the Battery. The Mains power adaptor must only be connected to a standard mains power outlet. Batteries preventing them from becoming overcharged. Charger Base Station Setup 0.5m 0.5m 3m t t t t t t Objects that can be easily knocked over. Edges of carpets or rugs that it may get caught on. Floor length curtains and tablecloths. Heat sources or flammable items. Power cords and cables. Fragile objects. 1. 2. 3. 4. the Charger Base Station.
GB Remote Control** Set Up To install batteries see Cleaner Maintenance - Replacing the batteries. Note: The Remote Control** can be used through walls because it works on radio waves not infrared. Virtual Barrier* Set Up To install batteries see Cleaner Maintenance - Replacing the batteries. DEMO t t t 1. 2. Remove any obstacles from the area that you want to block. Ensure the Virtual Barrier* is more than 3m away from the Charger Base Station.
GB Power On 1. 2. The LCD screen will illuminate. NOTE: If your robot is already switched On, but in standby mode, it can be activated from the remote control** or pressing one of the touch sensitive keys. 1. 2. Use the up and down arrow on the Remote Control** until the line appears below the correct day. Press 3. 4. 5. Day and time are now set. DEMO Cleaning Programs With the dust sensor*, on dust detection the Robo.
RoboCom2Manual2011__GBprint - Copy.pdf 1 7/14/2011 4:00:13 PM GB Setting up the Cleaning Schedule* the following: 1. (Monday). 2. DEMO 3. Once each day of the week have been selected, you can decided the hour of the cleaning schedule: the 4. 5. C The cleaning schedule for the days has been selected. This bar below the letter of the day indicates the ‘Current day’ the letter of the day indicates that day has a cleaning schedule set.
GB 1. 2. 3. Use a damp cloth with a little soap to clean all surfaces. DO NOT allow water into any part of the product whilst cleaning. Dry with a soft Cloth. Emptying the dust container Empty the dust container every cleaning cycle or when the dust container is full. 1. 2. 3. 4. Hold the dust container over a bin to empty. Use the Multi-purpose Cleaning Brush when necessary to remove any excess dust from the internal surface of the dust container. 5. invalidate your guarantee. 1. 2. 3. 4. 5.
GB Cleaning the Floor Brushes Clean the Floor Brushes regularly to maintain maximum cleaning performance. 1. 2. 3. 4. Rotate the Floor Brush assembly carefully and using scissors cut and remove any tangled threads or hair etc. Use the Multi-purpose Cleaning Brush to remove any excess dust. Replacing the Floor Brushes 1. 2. 3. 4. 5. 6. 7. Pull the Floor Brush Release Latch. Lift the Floor Brushes Retainer. Remove both Floor Brushes. Clean the recess that the Floor Brushes sit.
GB Cleaning the Edge Cleaning Brush The Edge Cleaning Brush can be easily worn from heavy use so you should check it regularly to monitor its condition. 1. 2. 3. Remove the retaining screw with a screwdriver. Use a pair of scissors to remove any trapped hair or debris. Correcting Edge Cleaning Brush Deformation The Edge Cleaning Brush can sometimes be deformed during transportation or when the product is used under particular conditions.
GB Cleaning the Sensor Window container is emptied. Frequent cleaning is recommended to ensure optimum performance of your Robo. Use a dry soft cloth or cotton swab to wipe the sensor window. Cleaning the Floor Polisher Pad* 1. 2. 3. 4. 5. Press the Floor Polisher Pad Holder* release button and unclip from the dust container. Tear the Floor Polisher Pad* from the Floor Polisher Pad Holder* and wash using hand warm water. Remove excess water and leave to dry before re-using. Re-assemble when fully dry.
GB TROUBLESHOOTING The following is a list of commonly encountered problems and solutions. If any of these problems persist contact your local Hoover representative. t t t Check that the dust container lter and motor are clean. t t t t t Empty dust container. Check and clean th lter and motor. Check and clean the Floor Brushes Check and clean the sensors. Check and clean the drive wheels. t t t Check the batteries. Cleaning power is weak The Remote Control** does not work t the Charger Base.
Robocom2 user manual EN.pdf 1 7/4/2012 9:10:38 AM GB IMPORTANT INFORMATION Hoover Spares and Consumables Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. When ordering parts always quote your model number.
® PRINTED IN P.R.C.
