User Manual HMDNB 5182WK HMDNB 5182XK HMDNB 5182WWDK HMDNB 5182XWDK
CONTENTS 1. Safety 1 2. Proper use of the refrigerator 2.1 Placement 2.2 Leveling feet 2.3 Door right-left change 2.4 Changing the light 2.5 Starting 11 11 12 12 15 15 3. Structure and fuctions 3.1 Key components 3.2 Functions 16 16 17 4. Maitenance and care of the refrigerator 4.1 Overall cleaning 4.2 Cleaning the glass shelf 4.3 Defrosting 4.4 Out of operation 19 19 19 19 19 5.
1. SAFETY Thank you for purchasing this product. Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners.
• Do not damage the refrigerant circuit. • Maintain the ventilation openings in the appliance enclosure or in the built-in structure, free of obstruction. • Never use water to wash the compressor position, wipe it with a dry cloth thoroughly after cleaning to prevent rust. • Handle the appliance always with at least two persons because it is heavy. • Install and level the appliance in an area suitable for its size and use.
• • • • • the appliance during and after carrying/moving the appliance, to avoid the mains cable becoming cut or damaged. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard. Do not install the appliance in humid, oily or dusty places, nor expose it to direct sunlight and to water. Do not install the appliance near heaters or inflammable materials.
• Do not excessively pull or fold the power cord or touch the plug with wet hands. • Do not store products which contain flammable propellant (e.g. spray cans) or explosive substances in the appliance. Risk of explosion! • Do not place unstable articles (heavy objects, containers filled with water) on top of the refrigerator, to ovoid personal injury caused by falling or electric shock caused by contact with water.
• Children should not play with the appliance. • Children aged from 3 to 8 years are allowed to load and unload this appliance. • FOR appliances with a freezer compartment: do not store bottled or canned liquids (especially carbonated drinks) in the freezer compartment. Bottles and cans may burst! • FOR appliances with a freezer compartment: never put frozen food straight from the freezer compartment in your mouth. Risk of lowtemperature burns! • Keep plastic parts and the door seal free of oil and grease.
• • • • • • contact always our customer service. Supervise children while the appliance is being cleaned or maintained. Do not clean the cold glass shelves with hot water. Sudden temperature change may cause the glass to break. WARNING: The tubes of the refrigeration circuit convey a small quantity of an environmentally friendly but flammable refrigerant (R600a) and insulating gas (cyclopentane). It does not damage the ozone layer and does not increase the greenhouse effect.
• Do not attempt to sit or stand on the top of the appliance. You could injure yourself or damage it. This appliance is not designed for stacking with any other ones. • The product is designed and built for domestic household use only. • Only original parts supplied by the manufacturer may be used. The manufacturer guarantees that only these parts satisfy the safety requirements. • Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
the freezing of fresh food. - If the appliance is left empty for long periods, switch off, defrost, clean, dry and leave the door open to prevent mould developing within the appliance.
SCRAPPING OLD APPLIANCES This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials.
Energy Saving For better energy saving we suggest : • • • • • • • • Installing the appliance away from heat sources and not exposed to direct sunlight and in a well ventilated roo. Avoid putting hot food into the refrigerator to avoid increasing the internal temperature and therefore causing continuos functionaliting of the compressor. Do not excessively stuff foods so as to ensure proper air circulation. Defrost the appliance in case there is ice to facilitate the transfer of cold.
2 Proper use of refrigerators 2.1 Placement m � 1'0J1 • Before use, remove all packing materials, including bottom cushions, foam pads and tapes inside of the refrigerator; tear off the protective film on the doors and the refrigerator body. • Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent rust or reduction of insulating effect.
2.2 Leveling feet Schematic diagram of the leveling feet H {The picture above is only for reference.The actual configuration will depend on the physical product or statement by the distributor) Adjusting procedures: a. Turn the feet clockwise to raise the refrigerator; b. Turn the feet counterclockwise to lower the refrigerator; c. Adjust the right and left feet based on the procedures above to a horizontal level. 2.3 Door right-left change List of tools to be provided by the user �<..
1 )Please power off this appliance before conduct this operation. Remove all food from door shelves. 2. Remove the upper left hinge cover decorative cover, upper right hinge cover and upper right hinge, and disconnect the signal line at the top of the box body 3. Remove the refrigerated door body (be careful not to lose small parts such as the shaft sleeve and stop on the door); Remove the middle hinge and remove the decorative cover of hinge hole on the other side. hinge 4.
5. Change the refrigerator door: 1) Remove the door stop and cap of the upper end cover of the refrigeration door and install them at the left and right swap positions. 2) Remove the door self-locking, door stop and shaft sleeve of the refrigeration door, install them on the other side of the refrigeration door. " 6. Change the freezing door: 1) Remove the shaft sleeve and cap of the upper end cover of the freezing door and install them at the left and right swap positions.
8. Remove the upper left hinge cover and upper left hinge from the accessory bag. Place the refrigerated door body on the middle hinge and install the upper left hinge. Connect the refrigerator left top door switch signal line to the left hinge switch line , replace the hinge decorative cover to the right side of the box body (note: when replacing the hinge decorative cover to the right side of the box body, the two inserts on the hinge decorative cover (as shown in the figure) shall be cut off) �--'7--'-.
3 Structure and functions 3.1 Key components Door switch LED light �� <''--~" l I � Shelf 2 1 i' 1 Fruits & vegeta bles box Multifunctional soace Pizza box I <· I I I Drawer Door tray I I I I "" I I I I= (The picture above is only for reference.The actual configuration will depend on the physical product or statement by the distributor) The most energy saving configuration requires drawers, food box and shelves to be positioned in the product; please refer to above pictures.
3.2 Functions Setting key r--7 SETTING L___J TEMP.CONTROL LEDl -16'C LED2 LED3 LED4 LEDS LED6 -18'C -24'C 8� 5� n L SUPER FREEZE _J L SUPER COOL _J (The picture above is only for reference.The actual configuration will depend on the physical product or statement by the distributor) 1.
5. Freezer setting When setting the freezer temperature, the temperature will cycle in the following order each time the setting key is pressed. In the super freeze state, LED1 and LED3 will light up at the same time.as shown below: ____. -24't____. -1 B't ____. -16't ____. SUPERFREEZE c 1 Recommended setti ng: Refrigerating chamber 4 °C, Freezing chamber - 18 °C. 6. When the door is opened, the display screen and the corresponding chamber lamp are on.
4. Maintenance and care of the appliance 4.1 Overall cleaning • Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving. • Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water or diluted detergent. • The interior of the refrigerator should be cleaned regularly to avoid odor.
5 Trouble shooting You may try to solve the following simple problems by y ourself. If them cannot be solved, please contact the after-sales department.
AVAILABILITY OF SPARE PARTS Thermostats, temperature sensors, printed circuit boards and light sources are available for a minimum period of seven years after placing the last unit of the model on the market. Door handles, door hinges, trays and baskets for a minimum period of seven years and door gaskets for a minimum period of 10 year, after placing the last unit of the model on the market.
EN FOR appliances without a 4-star compartment: this refrigerating appliance is not suitable for freezing foodstuffs FOR a free standing appliance: this refrigerating appliance is not intended to be used as a built-in ppliance FOR Wine Coolers: this appliance is intended to be used exclusively for the storage of wine FOOD STORAGE Position different food in different compartments according to be below table Refrigerator compartment Door or balconies of fridge compartment Crisper drawers (salad drawer) Fridge
- Tropical (T): ‘this refrigerating appliance is intended to be used at ambient temperatures ranging from 16 °C to 43 °C’ AVAILABILITY OF SPARE PARTS “Thermostats, temperature sensors, printed circuit boards and light sources are available for a minimum period of seven years after placing the last unit of the model on the market.
