Installation Instructions

TECHNICAL ASSISTANCE
To contact the technical assistance, visit our
website: https://corporate.haier-
europe.com/en/
Under the section “website”, choose the
brand of your product and your country. You
will be redirected to the specific website
where you can find the telephone number
and form to contact the technical assistance
For further information about the product,
please consult https://eprel.ec.europa.eu/ or
scan the QR on the energy label supplied
with the appliance
The above image is the control panel, and
only the buttons on left and right are
functional to control the refrigerator. The left
button is to switch on/off the refrigerator,
while the right button is to adjust the
temperature.
Press this button for 3 seconds to switch
the appliance on or off.
This product has power-off or power
failure memory function.
This button is used to adjust the
temperature within the fridge. Press this
sensor to make adjustment, the number
starts to flash, and if the button stops, the lit
number flashes，after 5 seconds stop
flashing , and the temperature shift
corresponding to the number is confirmed,
and then as many times as necessary until
the desired level is selected. The settings
range from super cooling, 2°C, 3°C, 4°C,
6°C, 8°C，and it will r
epresents the
approximate fridge temperature .
Start super cooling: when super cooling
selected, it means refrigerator will work at 2°C
for 24 hours, after that, the function will quit
automatically, then back to the original
temperature setting.
Please note: Where possible, avoid
having the temperature setting on super
cooling or 2°C all of the time. This will
help to alleviate strain on the compressor
and refrigeration system.
Press the for 15s, key flickering,
then access to the laboratory adjustable
state
Position
Conditions
2&3
Summer or ambient temperature
between
25-35 °C
4
Spring, autumn or ambient
temperature
between 15-25 °C
6&8
Winter, or ambient temperature
between 5-15 °C
15