7010PH POWERHEAD PRESTIGE Cyclonic Bagless Vacuum Cleaner with Powerhead Vibrating Powerhead Delivers Deep Clean Performance Compact, Lightweight & Stylish Design Prestige
7010PH Prestige 1 3 2 Congratulations on your purchase of your new HOOVER vacuum cleaner. There are many useful features built into your cleaner and we recommend that you carefully read this instruction book so that you may take best advantage of them. Features: 1. 2. 3. 4. 5. 6. 7. 8. 9. 4 5 7 10 11 10. 11. 12. 13. On/Off Button Upright Park Power Cable Automatic Cord Retract Button Accessories: 9 1. Flat Nozzle 2.
Before you begin Before you begin The cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring and fabrics. This cleaner is not fit to be used as an industrial cleaner, and is not designed for the collection of vitreous building material including particle board, construction products and similar products such as wood/fibres, cement, fillers, fibre glass etc or excessive or frequent sand.
Warning Instructions for use To reduce the risk of fire, electric shock, or injury: Before using, unwind a sufficient length of cable and insert the plug into the power socket. A yellow mark on the power cable shows the ideal cable length. Do not extend the cable beyond the blue mark. On/Off button 1. Press the on/off button to turn the vacuum on. 2.
3. Motor Protective Features Powerhead This appliance has been designed with a temperature controller which can automatically cut off the power supply of the motor to prevent overheating. When the air-inlet or air-outlet pipe is overloaded or blocked, the temperature of the motor rises hence the temperature controller cuts off the power supply to the motor automatically allowing the motor to cool, preventing the cleaner from being damaged.
Instructions for Use (continued) 1. Before assembling the vacuum cleaner, confirm all parts and components for the cleaner are included by referring to Parts and Components List. 2. Ensure the cleaner is not connected to the power supply when assembling. Assembly and Removal of the Dust Canister Place the bottom of the dust canister on the projecting part at the front end of the cleaner, and press down the dust canister.
Maintenance Vacuum Cleaner Storage When not in use, ensure the cleaner is not connected to the power supply, and pull the power cable gently out of the power socket. Step on the automatic cord rewind button to reel in the power cable fully. Hang the floor brush onto the floor park, as is shown. Store the cleaner in a cool dry location. Dust Canister Cleaning Remove the rubbish in the dust canister frequently to avoid unnecessary blockages that may lead to failure of the motor in prolonged occurrences.
Maintenance Troubleshooting Problems and solution If you come across a problem, please use the checklist of troubleshooting tips before ringing Hoover Customer Care. The rear motor filter is installed behind the air outlet grid, this filter is washable. When dust or dirt is visible on the surface of the filter, the filter should be replaced or washed with warm water to maintain efficient suction It is required to clean and replace the filters for the motor, after they have been used for 6 - 12 months.
Conditions of warranty Your Hoover cleaner, in the case of domestic use, has a three year parts and labour warranty against product defects and failures when the product is used in accordance with the terms and conditions of this warranty statement. This warranty commences from the original date of purchase and is not transferable; please retain your original proof of purchase for any warranty claims. This warranty is valid only in the country where the cleaner is purchased.
