SDS

Page 4 of 8
ONEPWRV
Lithium‐ion Battery ‐ Rechargeable
matter)
Lithium Hexaflurophosphate (LiPF
6
)
NA
NA
N
N
Polyvinylidene Flouride (PVDF)
NA
NA
N
N
Nickel
TWA = 1.5 mg/m3
TWA = 1 mg/m3
Y
Y
EYE PROTECTION:
Not necessary under conditions of normal use
SKIN PROTECTION:
Not necessary under conditions of normal use
RESPIRATORY PROTECTION:
Not necessary under conditions of normal use
ENGINEERING CONTROLS:
Not necessary under conditions of normal use
GENERAL HYGIENE CONSIDERATIONS:
Not necessary under conditions of normal use
EXPOSURE GUIDELINES:
Not necessary under conditions of normal use
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Data represent typical values and are not intended to be specifications. NA=Not Applicable; ND=Not Determined
Physical state:................................. Solid Viscosity: ....................................................... NA
Colour: ............................................ NA Upper Explosive Limits (vol % in air): ........... NA
Odor: .............................................. Odorless Lower Explosive Limits (vol % in air): ........... NA
Odor Threshold: ............................. NA Vapor pressure: ............................................ NA
pH:
................................................. NA Vapor density: ............................................... NA
Melting/Freezing Point: ................. NA Relative density: ........................................... NA
VOC Content:.................................. NA Solubility: ...................................................... NA
Boiling Point: .................................. NA Partition Coefficient:..................................... NA
Flash Point: ..................................... NA Auto‐ignition Temperature: ......................... NA
Evaporation Rate:........................... NA Decomposition Temperature: ...................... NA
Specific G
ravity: ............................ NA Flammability (solid, gas): .............................. Organic components will
burn if cell is incinerated
SECTION 10: STABILITY AND REACTIVITY
INCOMPATIBLE MATERIALS:
Water, heat and strong acids.
DECOMPOSITION PRODUCTS MAY INCLUDE:
Hydrogen Fluoride, Phosphorus Oxides, Carbon Monoxide, Carbon Dioxide, Lithium Hydroxide, Manganese Oxides, Aluminum
Oxide, possible fluoro‐compounds, Carbon soot.
CONDITIONS TO AVOID:
Do not crush, puncture, incinerate, immerse in water or heat over 212°F (100°C). Steel casing slowly dissolves in strong mineral
acids.