Owner's Manual Owner's Manual Cleaner

5
Attaching upper handle
Slide upper handle onto assembly,
as shown, until the handle snaps
into position.
Insert the two screws at the front of
the handle to secure it onto the
assembly.
Tighten the screws.
Attaching filter bag
Align opening in bag with dirt tube
(E) inside bag compartment.
E
F
G
A
1-12
1-11
1-15
Push bag firmly onto tube.
Tuck top and bottom of bag into bag
compartment.
To replace bag door, insert the 2
tabs (F) on bottom of door into the 2
slots on bag compartment.
Make sure all edges of bag are
completely inside the bag com-
partment.
Close door.
Continued ➜
1-13
1-14
1-16
1-17
Remove green or white switch lock
(A) in back of the cleaner.
Step 2 Attach tool
rack
Align screw holes (G) on the tool
holder and back of the cleaner.
Press holder into back of cleaner
until it snaps into position.
Insert the shorter screw from the
handle bolt and nut pack and tight-
en, using a Phillips screwdriver.
Step 3 Position hose
and tools
Place round end of hose over round
extension on bottom of holder.
1-19
1-18