Manual

CLEANINGTHE NOZZLE
The cleaner's noZZle can be removed for easy
cleaning.
A CAUTIONA
To reduce the risk of injury from moving parts-
Unplug before servicing, Do not use cleaner
without nozzle in place.
7.1 Pull on nozzle release latch iA) upward,
7.2 Remove nozzle by rotating nozzle.
Rinse nozzle under running water. Remove debris
from squeegee (0) and wipe with a damp cloth,
7.3 _roreattach nozzle, tilt cleaner backwards so the
front of the foot is 2-3" off of the floor. Secure upper
hanale with one hand and align nozzle squeegee
withbase from left to right with your other hand.
7,4 _[mpty rotate nozzte upward to lock in place.
CLEANINGTHE BRUSHES
The _brush assembly can be 'removed for easy
cleaning when the nozzle is completely removed.
See "CLEANING THE NOZZLE" section)
,& CAUTIONA
To reduce the dsk of injury from moving parts-
Unplug before servicing. Do not use cleaner
without brushes in place,
Remove both tanks to prevent leak[rig. Set aside.
Remove nozzle (7.1-7+2).
Release foot pedal and tilt cleaner back so handle
rests on floor.
7,5 Push two brush release buttons (B) and
remove the brush assembly.
The brushes can be washed with a mild detergent
and rinsed. Do not use a solvent based detergent.
7.6 To replace brushes, align post (C) on brush
block with hole (D) on bottom of cleaner. Turn
brushes slightly until post fits easily into hole.
Press brush assembly firmly to snap into place.
Return cleaner to updght position. Replace nozzle
(7+4-7.5), making sure it is locked into position+
Return tanks into proper positions.
Any other servicing shoufd be done by an
authorized service representative. If appliance
is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water,
take it to a service center prior to continuing
USe,
LUBRICATION
! I
The motor is equipped with bearings which contain
sufficient tubdcation for its lifetime. The addition of
lubricant could cause damage. Do not add lubricant
to motor.
11