Manual

HANDLERELEASEPEDAL
Step on pedai (A) to
lower handle to
operating position.
Handle does not lock
into a single position,
but "floats" to allow
convenient operation.
ON/OFFSWITCH
Push switch (A) once to
turn cleaner ON. Push
switch again to turn
cleaner OFE
TRANSPORTING
CORDSTORAGE
To move your cleaner The cleaner may also
from room to room, put be lifted using the carry
handle in upright handle (B) on front of
position, tilt cleaner cleaner.
back on rear wheels
and push forward.
Enroulor le cordon dane
le sons horaire autour
des deux crochets pour
cordon (C), Pour un
rangement pratique,
raccorder la fiche au
cordon.
DirtyWaterTank
(left sidewhenfacing unit)
Whento Empty
An automatic suction shut-off ]s built into the dirty
water tank to prevent the tank from overflowing.
When the shut-off activates, the cleaner will not pick
up water or debris and the sound of the motor will
change. The dirty water tank is full and must be
emptied.
Howto Empty
5.1 To remove tank, press down on release button
(A) and pull tank straight out,
5.2 Release tabs (B & C) on each side of the dirty
water tank to unlock the top portion of the tank.
WARNING
To reduce the risk of personal injury, unplug
before cleaning or servicing. Do not use
cleaner without tank in place.