Use and Care Manual

Actual model may vary from images shown.

After Using Tool

1. Drain suction hose by turning cleaner ON and

holding nozzle up for several minutes. Do not

press trigger.

2. Disconnect hose and solution tube from cleaner.

3. Drain solution tube by placing round end in sink

and raising the trigger end at the hose nozzle

above your head (Fig. 35). Press the trigger to

release air and fluid..

4. Replace Hose and tools in the Mesh Storage

Bag.

CAUTION

! !

Always turn off appliance before connecting

or disconnecting hose.