User Manual

ManualsBrandsHoover ManualsFloor MachineMax Extract 60 Pressure Pro Carpet Deep Cleaner

1. CLEANER ASSEMBLY

A. Base, Hose and Removable Dirty

Water Tank

B. Upper Handle

C. Handle Bolt (located in handle of unit)

D. SpinScrub

60 Brush Assembly or

SpinScrub

77 Brush Assembly

(Assembled on unit)

E. Stair/Upholstery Nozzle

(Assembled on unit)

F. SpinScrub

Hand Tool*

G. Clean Water Tank/ Carry

Handle

H. Squeegee* (Assembled on unit)

I. Solution Bottle

Remove all parts from carton and identify

each item shown.

Make sure all parts are located before

disposing of packing materials.

Handle ships with bolt

screwed in place. Remove

bolt.

1.2 Insert handle section

into vacuum base. Push

down firmly.

1.3 Insert bolt. Tighten

with screwdriver.

ATTACH HANDLE

CARTON CONTENTS

1.2

1.3

1.1

Carpet

Upholstery

Cleaner

Pre-

Cleaner

Bare

floor

cleaner

Actual model may vary from images shown.

1.4 1.5

UPPER TANK

1.4 Position bottom of tank onto cleaner.

1.5 Push upper part of tank to lock it into place.

STORE HOSE

1.6 Wrap hose around

back of cleaner. Store

hose handle in holster.

1.7

1.6

CORD STORAGE

1.7 Wrap cord around

cord hooks for

convenient storage.

Attach the plug end to

cord.

*Available on select models only. Accessories not included with your

model may be purchased separately by visiting hoover.com.

NOTE: Phillips screwdriver needed for assembly.