SDS

8. Exposure Controls / Personal Protection
Engineering
Controls:
Use in well-ventilated areas. Exhaust processing vapors completely from work
areas.
Personal Protective Equipment:
Eyes and Face: Wear safety glasses or chemical goggles to avoid accidental eye contact.
Respiratory: Not normally needed. However, avoid inhalation of thermal decomposition products.
Hands, Arms,
and Body:
Use rubber or neaporene work gloves when handling product transfers or if skin is
already irritated.
Other Safety shower and an eyewash should be available for emergency exposures.
Exposure Guidelines:
Ingredient ACGIH TLW ACGIH STEL OSHA PEL OSHA STEL
No ingredients listed in this section -- -- -- --
9. Physical and Chemical Properties
Appearance & Physical State Hazy ligh brown liquid
Odor: Linen scent
Odor Threshold: Not determined
pH 7 – 8
Specific Gravity (Relative density): 1.002 -1.01
Initial Boiling Point & Range: 212°F (100°C)
Melting Point /Freezing Point: 30 – 32 °F (-1 - 0°C)
Evaporation Rate: Not determined
Percent Volatile: 90 – 97
Solubility in Water Completely soluble
Vapor Density: Not determined
Vapor Pressure: Similar to water
Upper/ Lower Flammable Limits: None
Flash Point Not flammable
Auto ignition Temperature: Not determined
Flammability (solid, gas) Not applicable
Octanol/water partition coefficient Not determined
Decomposition temperature Not determined
Viscosity <25 Cps
10. Stability and Reactivity
Stability: Stable product
Conditions to Avoid: Intense heat may cause changes in product
Materials to avoid None noted
Hazardous Polymerization: Will not occur
Hazardous Decomposition
Products
Carbon monoxide and other non-itentified carbon by-products may be
formed upon pyrolosis.
Platinum Pet Family Detergen – March 31, 2015 Page 3 of 6