BUILT-IN FRIDGE-FREEZER AND BUILT-IN FROST FREE FRIDGE-FREEZER EN
BUILT-IN FRIDGE-FREEZER AND BUILT-IN FROST FREE FRIDGE-FREEZER CONTROL PANEL (figure 1) The thermostat box to control the appliance is located inside the fridge compartment on the top right. To check whether the appliance is functioning, make sure that the thermostat knob is not set on "0“. Adjust the knob according to the desired temperature in the fridge. In this product the freezer compartment is automatically defrosted.
PRODUCT DIMENSIONS AND BUILT-IN COMPARTMENT INSTALLATION OF THEAPPLIANCEIN THE COLUMN Fasten the gasket provided with the appliance on the opposite side of the hinges. Insert the appliance in the column, positioning it on the opposite side of the hinges. Make sure the top connecting plate of the cabinet fits perfectly in the plate. Fasten the top part of the appliance to the cabinet, using the screws provided. Fasten the bottom part of the appliance by means of the screws provided.
COUPLING OF THE PANELS OF THE BUILT-IN COLUMN TO THE DOORS OF THE APPLIANCE PRECAUTIONS FOR THE CORRECT FUNCTIONING The appliance is equipped with coupling devices for the appliance doors with the panels of the column (drive sleds). Once the product has been built in, position the rear part of the column in contact with the wall so as to prevent access to the compressor compartment.
