USER INSTRUCTIONS OVENS EN 02 CANDY HOOVER GROUP S.R.L.
Safety Indications • During cooking, moisture may condense inside the oven cavity or on the glass of the door. This is a normal condition. To reduce this effect, wait 10-15 minutes after turning on the power before putting food inside the oven. ln any case, the condensation disappears when the oven reaches the cooking temperature. • Cook the vegetables in a container with a lid instead of an open tray. • Avoid leaving food inside the oven after cooking for more than 15/20 minutes.
• Only use the meat probe recommended for this oven. • Do not use a steam cleaner for cleaning operations. • Connect a plug to the supply cable that is able to bear the voltage, current and load indicated on the tag and having the earth contact. The socket must be suitable for the load indicated on the tag and must have ground contact connected and in operation. The earth conductor is yellow-green in colour. This operation should be carried out by a suitably qualified professional.
cause a malfunction of the monitor. ln this case contact customer service. • The appliance must not be installed behind a decorative door in order to avoid overheating. • When you place the shelf inside, make sure that the stop is directed upwards and in the back of the cavity. The shelf must be inserted completely into the cavity. • WARNING: Do not line the oven walls with aluminium foil or singleuse protection available from stores.
Summary General Instructions 1.1 Safety indications 6 1.2 Electrical safety 1.3 Recommendations 1.4 Installation 1.5 Waste management 1.6 Declaration of compliance Product Description 2.1 Overview 8 2.2 Accessories 2.3 First use Use of the Oven 3.1 Display description 9 3.2 Using the end of cooking timer 3.3 Cooking modes Oven Cleaning and Maintenance 4.1 General notes on cleaning 12 4.
1. General Instructions We thank you for choosing one of our products. For the best results with your oven, you should read this manual carefully and retain it for future reference. Before installing the oven, take note of the serial number so that you can give it to customer service staff if any repairs are required. Having removed the oven from its packaging, check that it has not been damaged during transportation. If you have doubts, do not use the oven and refer to a qualified technician for advice.
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available so that the oven can be connected to this if it is removed from the space in which it is installed. The power cable must only be substituted by technical service staff or by technicians with equivalent qualifications. 1.3 Recommendations After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
2. Product Description 2.1 Overview 1 1. Control panel 2. Shelf positions (lateral wire grid if included) 3. Metal grill 4. Drip pan 5. Fan (behind the steel plate) 6. Oven door MENU 2 5 4 3 6 2.2 Accessories 4 Grill pan set 1 Metal grill Holds baking trays and plates. 2 Drip pan The simple shelf can take moulds and dishes. The tray holder shelf is especially good for grilling things. Use it with the drip tray. Collects the residues that drip during the cooking of foods on the grills.
2.3 First Use PRELIMINARY CLEANING Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness. 3. Use of the Oven 3.1 Display description 8 MENU 1. Minute minder 2. Clock setting 3. Cooking time 4. End of cooking 5.
FUNCTION HOW TO USE HOW TO DEACTIVATE KEY LOCK •Child Lock function is activated by touching Set (+) for a minimum of 5 seconds. From this moment on all other function are locked and the display will flash STOP and preset time intermittently. •Child Lock function is deactivated by touching touchpad Set (+) again for a minimum of 5 seconds. From this moment on all functions are selectable again.
3.3 Cooking Modes Function Dial T °C default T °C range Function (Depends on the oven model) LAMP: Turns on the oven light. DEFROST: When the dial is set to this position. The fan circulates air at room temperature around the frozen food so that it defrosts in a few minutes without the protein content of the food being changed or altered. 180 210 * * MULTI-LEVEL: We recommend you use this method for poultry, pastries, fish 50 ÷ 240 and vegetables.
4. Oven cleaning and maintenance 4.1 General notes on cleaning The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based detergents (ammonia). GLASS PARTS It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven.
4.3 Hydro Easy Clean Function The HYDRO EASY CLEAN procedure uses steam to help remove remaining fat and food particles from the oven. 1. Pour 300 ml of water into the HYDRO EASY CLEAN container at the bottom of the oven. 2. Set the oven function to Static ( ) or Bottom ( )heater 3. Set the temperature to the HYDRO EASY CLEAN icon 4. Allow the program to operate for 30 minutes. 5. After 30 minutes switch off the program and allow the oven to cool down. 6.
REMOVAL AND CLEANING OF THE GLASS DOOR 1. Open the oven door. 2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards. 5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove the second and third glass (if present)). 7. At the end of cleaning or substitution, reassemble the parts in reverse order.
CHANGING THE BULB 1. Disconnect the oven from the mains supply. 2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type. 3. Once the defective bulb is replaced, replace the glass cover. 5. Troubleshooting 5.
INSTALLATION EN 560 mm 590 mm 560 mm Opening 460mm x 15 mm 560 m m 595 mm 580 mm 546 mm 595 mm 22 mm 560 mm x 45 mm A EN If the furniture is coverage with a bottom at the back part, provide an opening for the power supply cable. A EN If the mounting of the plinth does not allow air circulation, to obtain the maximum performance of the oven it is necessary to create an opening of 500x10mm or the same surface in 5.
