USER INSTRUCTIONS OVENS EN 02 CANDY HOOVER GROUP S.R.L.
Safety Indications • During cooking, moisture may condense inside the oven cavity or on the glass of the door. This is a normal condition. To reduce this effect, wait 10-15 minutes after turning on the power before putting food inside the oven. ln any case, the condensation disappears when the oven reaches the cooking temperature. • Cook the vegetables in a container with a lid instead of an open tray. • Avoid leaving food inside the oven after cooking for more than 15/20 minutes.
• Only use the meat probe recommended for this oven. • Do not use a steam cleaner for cleaning operations. • Connect a plug to the supply cable that is able to bear the voltage, current and load indicated on the tag and having the earth contact. The socket must be suitable for the load indicated on the tag and must have ground contact connected and in operation. The earth conductor is yellow-green in colour. This operation should be carried out by a suitably qualified professional.
• The appliance must not be installed behind a decorative door in order to avoid overheating. • When you place the shelf inside, make sure that the stop is directed upwards and in the back of the cavity. The shelf must be inserted completely into the cavity. • WARNING: Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium foil or any other protection, in direct contact with the hot enamel, risk melting and deteriorating the enamel of the insides.
Summary General Instructions 1.1 Safety indications 6 1.2 Electrical safety 1.3 Recommendations 1.4 Installation 1.5 Waste management 1.6 Conformity declaration Product Description 2.1 Overview 8 2.2 Accessories 2.3 First use Use of the Oven 3.1 Display description 9 3.2 Cooking modes Oven Cleaning and Maintenance 4.1 General notes on cleaning 12 4.2 Pyrolysis 4.3 Hydro Easy Clean Function 4.
1. General Instructions We thank you for choosing one of our products. For the best results with your oven, you should read this manual carefully and retain it for future reference. Before installing the oven, take note of the serial number so that you can give it to customer service staff if any repairs are required. Having removed the oven from its packaging, check that it has not been damaged during transportation. If you have doubts, do not use the oven and refer to a qualified technician for advice.
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available so that the oven can be connected to this if it is removed from the space in which it is installed. The power cable must only be substituted by technical service staff or by technicians with equivalent qualifications. 1.3 Recommendations After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
2. Product Description 2.1 Overview 1 3 1. Control panel 2. Shelf positions (lateral wire grid if included) 3. Metal grill 4. Drip pan 5. Fan (behind the steel plate) 6. Oven door 2 5 4 6 2.2 Accessories 4 Grill pan set 1 Metal grill Holds baking trays and plates. 2 Drip pan The simple shelf can take moulds and dishes. The tray holder shelf is especially good for grilling things. Use it with the drip tray. Collects the residues that drip during the cooking of foods on the grills.
2.3 First Use PRELIMINARY CLEANING Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness. 3. Use of the Oven 3.1 Display description 4 7 2 3 1 6 5 1. Timer/automatic mode 2. Fan function 3. Defrost mode 4.
FUNCTION HOW TO ACTIVATE WHAT IT DOES WHY IT IS NEEDED • Rotate the function selector to the position OFF. • Enables you to turn off the sound of the minute minder. • To turn off the sound of the minute minder • Rotate the function selector to the position OFF. • Enables you to set the time which appears on the display • To set the time NB : Set the time when you first install your oven or just after a black out (the clock is showing a pulsating 12.
3.2 Cooking Modes Function Dial T °C default T °C range Function LAMP: Turns on the oven light. DEFROST: When the dial is set to this position. The fan circulates air at room temperature around the frozen food so that it defrosts in a few minutes without the protein content of the food being changed or altered. * 220 180 210 CONVENTIONAL : Both top and bottom heating elements are used. Preheat the oven for about ten minutes. This method is ideal for all traditional roasting 50 ÷ 280 and baking.
4. Oven cleaning and maintenance 4.1 General notes on cleaning The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based detergents (ammonia). GLASS PARTS It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven.
Using the pyrolitic cycle: 1- Rotate the function selector to the position " ". On the display, appears the indication " ECO " or " SUP ". The preset time is 90 min, this can be varied from 90 min (Eco mode) to 120 min (Sup mode) via the programmer (setting button " + " or " - "). If the oven is very dirty, it is recommend o increase the time to 90 min, if the oven is moderately dirty reduce the cleaning cycle time to 90 min.
4.4 Maintenance INSTRUCTİON FOR REMOVAL AND CLEANİNG OF THE SİDE RACKS 1. Unscrew the bolt in an anti-clockwise direction. 2. Remove the side racks by pulling them towards you. 3. Clean the side racks in a dishwasher or with a wet sponge and then dry them immediately. 4. Having cleaned the side racks, put them back in and reinsert the bolts, ensuring that they are fully tightened. A REMOVAL OF THE OVEN WINDOW 1. Open the front window. 2.
REMOVAL AND CLEANING OF THE GLASS DOOR 1. Open the oven door. 2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards. 5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove the second and third glass (if present)). 7. At the end of cleaning or substitution, reassemble the parts in reverse order.
CHANGING THE BULB 1. Disconnect the oven from the mains supply. 2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type. 3. Once the defective bulb is replaced, replace the glass cover. 5. Troubleshooting 5.
INSTALLATION EN Opening 460 mm x 15 mm 590 mm 560 mm 560 m m 560 mm 595 mm 580 mm 546 mm 595 mm 22 mm A 560 mm x 45 mm EN If the furniture is coverage with a bottom at the back part, provide an opening for the power supply cable. A EN If the mounting of the plinth does not allow air circulation, to obtain the maximum performance of the oven it is necessary to create an opening of 500x10mm or the same surface in 5.000 mm2 560 mm Opening 560 mm x 45 mm 560 mm A 42834585• 70gr A5 • 02.