Instructions / Assembly

Insert handle into the base

until you hear a “click”.

Remove clean water tank,

twist off water cap and add

warm water. Replace cap.

Wrap the power cord

around the cord hooks for

convenient storage.

Remove the Solution Tank

from the back of the unit.

Remove the cap and ﬁll with

Hoover

Cleaning Solution

to the top of the tank.

Replace cap.

2 3

NO TOOLS REQUIRED

PAGE 1
NO TOOLS REQUIRED 1 2 Insert handle into the base until you hear a “click”. 1 Remove clean water tank, twist off water cap and add warm water. Replace cap. Wrap the power cord around the cord hooks for convenient storage. 2 Remove the Solution Tank from the back of the unit. 3 Remove the cap and fill with Hoover® Cleaning Solution to the top of the tank. Replace cap.
PAGE 2
HOW TO USE (CONTINUED) 4 5 6 7 Step on the Handle Release Pedal to recline the unit for cleaning position. Step on the Power Pedal to turn unit ON. Slowly move forward. The unit will automatically dispense the optimal amount of water and cleaning solution. Slowly pull backward. The unit will automatically dry your carpets by extracting the water. SEE USER MANUAL FOR COMPLETE INSTRUCTIONS Visit us at www.hoover.