™ SilentAir® 2000 Air Purifier Fanless Electronic Air Purifier ™
Fill in and retain The model and serial number are located on the back of the air purifier. For your personal records, please enter the COMPLETE model and serial number in the spaces provided and retain this information. Your air purifier is model___________________________________ and has serial number___________________________________ It is suggested that you attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warranty service of your SilentAir® product.
Thank you for purchasing the Hoover™ SilentAir® 2000 The SilentAir® air purifier has been designed for simple, problem free operation. If you should happen to need assistance, contact the Hoover SilentAir Customer Service Center 1-800-473-8520 www.silentair.com Carton contents A. Air purifier B. Collection sheet packet B A 1. Air Purifier Description 1-1 9 8 7 9 1 1. 2. 3. 4. 5. 6. 7. 8. 9.
Assembly 1-2 1-3 1-4 G B D D F E C A E D Always disconnect cord from electrical outlet before servicing the air purifier. Grasp top corners of front cover (A) and pull cover off. Carefully slide one collection sheet (B) UNDER ionization line (C). Place sheet under the four holding tabs (D), located along each side of the unit. Insert tabs (E) on front cover into slots (F) on purifier. Rotate cover into place. A magnetic latch (G) will hold it in place. 2.
2-2 3. Maintenance Collection sheet When to replace C Once every 30 days, the light will flash red and the collection sheet should be changed. (See Maintenance section) The collection sheet should be changed about once a month. When the collection sheet change light flashes, it is time to change the sheet. If particle or smoke levels in the room are high, the sheet may need to be changed more frequently, even if the collection sheet change light is not flashing.
3-8 3-7 3-6 H I J C H Turn air purifier off and disconnect from electrical outlet. Remove front cover as described for replacing the collection sheet. Carefully wipe clean the ionization line (C), using a soft, lint-free cloth. To remove ionization line: Grasp one end of the line and gently stretch it to release ring (I) from hook (J). Remove opposite ring from hook. To replace ionization line, slip the ring at one end over the hook.
Problem: Light emitted from air purifier • Common condition caused by static electricity. No action required. Will not harm air purifier. Problem: Aluminum plates discolored • Occurs over time under normal operation • Discoloration will not harm product performance. Disconnect from electrical outlet and, if desired, replace aluminum plates (part no.