Manual

UPRIGI,tr
OFF
LOW
HIGH
How to use
To transport
To move your cleaner from room
to room, put the handle in the ,p-
right position, tilt the cleaner back
on the large rear wheels and push
forward.
Handle adjustment
The handle of your cleaner has
three positions: Upright for stor-
age and when using attachments.
Operating for general operation on
carpet and foors. Low for reaching
under low furniture. The handle
can be lowered by stepping on the
pedal on either side at the rear of
the cleaner. (Some models have
only one pedal. )
ON-OFF switch
To turn cleaner ON, push switch
down. To turn cleaner OFF, push
switch up.
Some cleaners are equipped with
a two-speed switch. When the
switch is pushed up as far as pos-
sible, it is in the OFF position.
LOW SPEED is to be used for less
vigorous cleaning and reduced
suction on delicate carpet, rugs,
and non-carpeted floors. Slide
the switch down one notch from
OFF to LOW speed.
HIGH SPEED is to be used for
cleaning most carpet and for use
with attachments. When the
switch is pushed down as far as
possible it is in HIGH speed.
Note: When cleaning any floor
covering, turn cleaner "OFF"
when unattended, particularly on
non-carpeted floors. The agitator
cleans so thoroughly that opera-
tion while the cleaner is stationary
may mar the floor covering.