Self-Propelled WindTunnel by HOOVER TM Congratulations your purchase! This WindTunneV' takes HOOVER® Filtration filter vacuum Type "Y" cleaner Allergen bags This product was designed for easy Assembly (See page 3) on
Owner's ENGLISH ESPANOL FRANQAtS Fill in Review Manual manual operating -I, pp.1-1 3 _ peg. 14-21 _ this before cleaner p. 22-28 and retain The model and serial number are located on the back of the handle as shown. For your personal records, please enter the COMPLETE in the spaces provided and retain this information. model and serial number Your cleaner is model and has serial number It is suggested that you attach your sales receipt to this owner's manual.
Index Assembling Cleaner ............................................................ 3-4 Carton Contents .................................................................. 3 HowTo Use Cleaner Descriptions .......................................................... 5 Cleaning Tools .................................................................. 7-8 Embedded Dirt FINDERTMFeature ...................................... 6 Upright Cleaner ................................................................
m m D A-- Slide handle Push into screws back into holes of cleaner. on Remove back of pulling handle. Looking at the back of the make sure switch (A) is in cleaner, the OFF lock it straight (B) above front out. of ON- by handle Dispose of lock, Using a Phillips screws position. switch OFF switch (C) on screw driver, tighten If switch lock has come off during assembly, make sure switch is in OFF position (down) before plugging cord into electrical outlet. securely.
Cleaner description The m assembled look like cleaner the 14. Brush roll control: will drawing. slide for 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 4 23 20_ Handle Self-propel button ON-OFF switch Hose Furniture nozzle Crevice tool Dusting brush Tool cover Final filter door Handle release lever: step 22 on lever handle 19._ low 4 brush cord Switch into electrical This cleaner Self-propel cleaner ON, To turn cleaner OFF, push this plug This reduce plug one way.
111 m A B \ \ Carrying The cleaner cleaner the can carrying of the be Handle moved handle located by using on the The back cleaner. of positions; your for cleaning tion for and cleaner upright using Embedded positions handle floors; storage and operation lOW For three operating tools; general has posi- on reaching when carpet under low featu re With red system of that It amounts Step on handle release lever to lower green FINDER' attention.
P_IKe] P_llll AUTOMATIC BIRUS H ROLL ON OFF i n d i c ator When red is (some in models flexible only) OFF window, the Stand brush ro, is STOPPED. When red is in the ON window brush roll one cleaner toward Before reaching er Cleaning lightweight as shown clinging when to use will and end edge, lift move or edge.
Ill B P,_B] C A4L Attach wand Extra and tools reach Follow the steps detaching Attach tool pushing or wand it firmly to into the hose (B) hose below the for m Check attaching and hose. 1. Push ON/OFF tion. hose. (some models The by switch to OFF posi- the filter by second pushing Twist wand loosen wand or it firmly or the tool onto tool to the slightly wand (C) wand. to 2. Remove 3.
Secondary c Removing and installing Filter Replacing bag bag Reposition Grasp filter from bag tube collar (A) and pull collar bottom of Note: Do not new ing clean Discard Hold in door filter filter out old used bag bag P.sh (A) firmly filter filter as bag by into placing opening tab on (C). with (B). (B). of door to snap Cleaning securely shut. and Align secondary fi Iter Disconnect cleaner from electrical outlet. bag. shown.
Belt The replacement belts plate are of checked they located the from are in other and time good is to the bottom should time be to be sure condition, The flat (wide) the under cleaner belt is described below; under "Brush roll described replacement". When to replace Disconnect cleaner from electrical outlet. Installing bulb and replacing Warning - Brush roll can start suddenly. Unplug cleaner when it is turned over.
To install side of ley and new belt (with lettering on slide back of belt front of belt toward belt), pull out- over pul- groove (E) next to pulley. Belt Replacing brush Removing Slide brush Brush Turn ole_lner plate (Fig. Lift Roll (OFF) "Hard" up brush roll Inspecting roll Control 2-9) (Fig. to over remove roll time and as bottom and slide V-belt (U) off roll. is is designed not to normally if V-belt now Slide flat Fig. is belt 3-10.
Lubrication The motor that is equipped contain life sufficient of the cant with could lubrication The motor. cause Olearing blockages Disconnect cleaner from electrical outlet. bearings for addition of the lubri- If a Therefore, damage. be do not add lubricant to motor bearings.
Full One Year Warranty (Domestic Your HOOVER(R> in normal with household the a in period cost to this full This you, in during warranty its territories the a are This S. is or a in the in a else- limited one cost does used is including Military covers warranty appliance rental States by which This appliance purchased covered warranty only. U. con- period. the no place operating Appliances where at to possessions, from Exchange.
