Use and Care Manual

POSITION TOOLS

1. VACUUM ASSEMBLY

A. Handle*

B. Vacuum Base

C. Telescoping Wand

D. Crevice Tool

E. Pet Turbo Tool

F. Pet Articulating Tool

G. (1) Large Screw

H. Dirt Cup

*Varies per model.

Remove all parts from carton and identify

each item shown.

Make sure all parts are located before

disposing of packing materials.

1.2 1.3

1.2 Insert handle section into vacuum base. Push

down firmly. Using a Phillips screwdriver, fasten (1) large

screw behind handle into vacuum base.

1.3 Wrap hose around top of hose guide located on the

handle. Insert the hose into hose tube until you hear a click.

ATTACH DIRT CUP

1.6

1.6 Place bottom of dirt cup into vacuum body first.

Pivot cup into vacuum. Dirt cup is secure when you hear a

click.

1.4 Place Crevice Tool into the bottom of the Telescoping

Wand and slide onto the unit on left back side (C) of vacuum

and place Pet Turbo Tool on right back side (E) of vacuum as

shown.

1.5 Place Pet Articulating Tool (F) on top of wand.

CARTON CONTENTS

1.1

Actual model may vary from images shown.

ATTACH HANDLE

B C

E FD

1.5

1.4