product manual

10
4. MAINTENANCE
Familiarize yourself with these home maintenance tasks as proper use and care
of your vacuum will ensure continued cleaning effectiveness
f appliance is not working as it should has been dropped damaged left
outdoors or dropped into water take it to a service center prior to continuing use
4 1 The System Check ndicator located at (A) alerts you to possible system
performance issues
Any other servicing should be done by an authorized service representative
4 2 To maintain optimal performance empty the dirt cup before the dirt cup
reaches the max line (A) Place the vacuum in the upright position before
removing the dirt cup
When to Empty
DIRT CUP
WARNING
! !
To reduce the risk of personal injury Unplug before cleaning or
servicing Do not use vacuum without dirt cup or filters in place
Very fine materials such as face powder or cornstarch may seal the filter
and cause a reduction in performance When using the vacuum for this
type of dust empty the cup and clean the filters often
4.2
4.1
A
A
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
f System Check
ndicator is red:
1 Rinsable filter and/or filter made
with HEPA media is dirty
1 Clean rinsable filter and/or filter made with
HEPA media reference pg 11
2 Dirt cup is full and/or clogged 2 Empty dirt cup reference pg 11
3 Brushroll and/or hose is
clogged
3 Check hose for clogging reference pg 13
Check brushroll for clogging reference pg 12
4 Valve dial may be partially
turned and not in proper mode
4 Turn valve dial to HOSE or FLOOR mode
reference pg 7
A Thermal Protector has been designed into your cleaner to protect it from overheating When the
thermal protector activates the cleaner will stop running
f this happens proceed as follows:
1 Turn cleaner OFF and unplug it from the electrical outlet
2 Empty dirt cup
3 nspect the nozzle inlet hose connector hose dirt cup inlet cyclonic filter rinsable filter and
HEPA filter for any obstructions Clear obstructions if present
When cleaner is unplugged and motor has cooled for 30 minutes the thermal protector will deactivate
and cleaning may continue
f the thermal protector continues to activate after following the above steps your cleaner
needs servicing
NOTICE
! !
Actual model may vary from images shown.