product manual

ATTACH HANDLE
POSITION TOOLS
(varies per model)
1. VACUUM ASSEMBLY
A Handle
B Vacuum Base
C Pet Turbo Tool/Turbo Tool*
D Crevice Tool
E Telescoping Wand
F Screw (for assembly)
G Dirt Cup
H Pet Upholstery Tool*
Articulating Upholstry Tool*
J Articulating Dusting Tool*
K Extra Filter*
*Varies per model
Remove all parts from carton
and identify each item shown
Make sure all parts are located before
disposing of packing materials
Additional parts may be ordered at Hoover
com or call 1 800 944 9200
5
1.3
1.2
Note: Remove the screw located in the vacuum
base and set aside until instruction 1 3
1 2 nsert handle section into vacuum base Push
down firmly
1 3 Using a Phillips screwdriver fasten (1) screw
behind handle into vacuum base
ATTACH DIRT CUP
1.4
1 4 Place bottom of dirt cup into vacuum body first
Pivot cup into vacuum Dirt cup is secure when you
hear a click
1.5 1.6
1 5 Attach bottom of Turbo Tool (A) and pivot into Air
powered Tool Clip until secure
1 6 Place Crevice Tool into Wand and slide into
tool storage area on left back side (B) of vacuum
and place Upholstery Tool or Articulating Tool on
right back side (C) of vacuum as shown
B
C
CARTON CONTENTS
A
Actual model may vary from images shown.
B
C
E
1.1
F
G
H
K
J
D
A