Manualshelf

Specification Sheet

ManualsBrandsHop Industries ManualsLaminating Supplies4 Rolls of School Laminating Film.25"x500' 1.5 Mil. 1" Core
1
Trans-Kote
®
PET/MR Laminating Film
Thin Gauge
DESCRIPTION:
Trans-Kote
®
PET/MR laminating film, thin gauge is
a high-clarity, abrasion-resistant polyester-base
film designed for high speed single- and double-
sided laminating. Trans-Kote
®
PET/MR laminating
film, thin gauge is a number of films that are 2 mils
and thinner.
CHARACTERISTICS:
• Ideal for laminating book jackets, posters, menus
and maps, as well as a wide variety of
commercial applications that demand excellent
clarity and protection.
• Available in gloss, matte, and satin surfaces.
• Low-melt-point adhesive.
• Water, oil, acid, and alkali resistant.
• Can be die cut.
TECHNICAL DATA:
1.2 1.3 1.7 1/1 ASTM
PROPERTIES
GLOSS GLOSS* MATTE SATIN GLOSS MATTE GLOSS
THICKNESS ±10% .0012” .0013” .0017” .002”
SURFACE TENSION - dyne - adhesive side 44 to 52
COEFFICIENT OF FRICTION OF BASE FILM SIDE 0.45 to 0.55 0.30 0.45 to 0.55 D 1894
MD 26,307 28,500 5,608 11,500 30,400 5,964 13,400
TENSILE STRENGTH - psi ±10%
TD 30,460 33,000 8,176 10,500 34,500 8,068 16,000
D 882
MD 140 150 18 100 160 40 94
ELONGATION - %
TD 105 110 37 95 120 27 108
D 882
YIELD - in2/lb 19,510 19,260 19,300 15,265 15,460 12,350
LAMINATING TEMPERATURE RANGE - °F - internal 210° to 230°
BOND STRENGTH - p/i - laminated to itself 5 to 7 4 to 6 6 to 8 4 to 6 9
NOTE: All information, recommendations and suggestions contained herein, including, without limitations, stated values (collectively the “Information”) shall be used
only as a guide by Purchaser and not for specification or any other purpose. The Information does not constitute a warranty nor guaranty of any type whatsoever.
Purchaser should independently determine the suitability of all material purchased and must confirm adaptability and other characteristics by conducting its own tests.
Transilwrap shall have no liability as a result of any loss, expense, damage, cost or other injury which results from Purchaser's reliance on the Information.
*1.3 mil gloss finish laminating film can be glued, stamped, and printed.
Revision Date: 05/12/2009
Printed in the U.S.A.
DSTKPETMRTG5

Summary of content (1 pages)