User Manual

Table 1, the foot-bit definition of the RFM380F32
foot
name
describe
Configuration function
1
P36
MCU and so on
IO
UART1_RXD
、
TIM6_CHA
、
UART0_RXD
、
PCA_CH4
、
TIM5_CHA
、
spi_mosi
、
i2c_scl
、
AIN6/VC6/AVREF
2
P35
MCU and so on
IO
UART0_TXD
，
TIM0_GATE
、
TIM4_CHB
、
SPI_MISO
，
I2C_SDA
，
AIN5/VC5
，
UART1 TXD
3
RESET
Hard reset pin
-------------------
4
P33
MCU and so on
IO
UART2_RXD、pca_ch1、tim5_chb、PCA_ECI、UART1_RXD、
XTL_OUT、TIM1_TOGN、AIN3/VC3
5
GPIO3
The GPIO3 of the
RF
CLKO, DOUT/DIN, INT2,DCLK (TX/RX)
6
VCC
Positive power
supply
---------------------
7
GND
earth wire
--------------------
8
RFOUT
RF output
---------------------
9
P01
MCU and so on
IO
UART0_RXD,I2C_SDA, UART1_TXD, TIM0_TOG, TIM5_CHB,
SPI_SCK, TIM2_EXT, AIN7/VC7,XTHI
10
P02
MCU and so on
IO
uart0_txd，i2c_scl，uart1_rxd，tim0_togn，tim6_cha，spi_cs，
tim2_gate，ain8，extho
11
P25
MCU and so on
IO
SPI_SCK、pca_ch0、tim5_cha 、LVD_OUT、 UART2_RXD、
I2C_SDA、TIM1_GATE、LVDIN3/VC1
12
P26
MCU and so on
IO
SPI_MOSI，TIM4_CHA，TIM5_CHB，PCA_CH2，UART2_TXD，
I2C_SCL，TIM1_EXT，AIN
13
SWDIO
SW shakedown
test IO
------
14
SWCLK
TheSW
debugging clock
--------
15
GPIO1
The GPIO1 of the
RF
DOUT/DIN, INT1,INT2,DCLK (TX/RX),RF_SWT
remarks:
1 RFM380F32 chip 32nd foot SCLK and chip 27th foot has been external connected
2 RFM380F32 chip 33rd foot SDA and the chip 26th foot are external connected
3 RFM380F32 chip 34th foot CSB and the chip 23th foot are external connected
4 RFM380F32 chip 35th foot FCSB and chip 9th foot has been external