Owners manual

F2A
53015
FIG. 1
WIRE CODE
White wire------ Ground
Blue wire-------- Electric brake
Black wire------ Battery
Red wire-------- Stop lamp switch
1. Locate the vehicle’s electric brake
control harness connector. The
harness will be located underneath
the dash and left of the steering
column. (A) taped to another
harness near the emergency brake
pedal. There will be a 4-pin connector
that mates with the brake control
connector.
2. Peel off tape and plug the vehicle
connector in to the brake control
connector.
3. Plug mating end of the brake control
connector into the brake control.
Wire to brake control by
function only. Color coding
is not standard among all
manufacturers. To ensure proper
installation, read brake control
instructions thoroughly.
A
53015
FIG. 1
WIRE CODE
White wire------ Ground
Blue wire-------- Electric brake
Black wire------ Battery
Red wire-------- Stop lamp switch
1. Locate the vehicle’s electric brake
control harness connector. The
harness will be located underneath
the dash and left of the steering
column. (A) taped to another
harness near the emergency brake
pedal. There will be a 4-pin connector
that mates with the brake control
connector.
2. Peel off tape and plug the vehicle
connector in to the brake control
connector.
3. Plug mating end of the brake control
connector into the brake control.
Wire to brake control by
function only. Color coding
is not standard among all
manufacturers. To ensure proper
installation, read brake control
instructions thoroughly.
A
53015
FIG. 1
WIRE CODE
White wire------ Ground
Blue wire-------- Electric brake
Black wire------ Battery
Red wire-------- Stop lamp switch
1. Locate the vehicle’s electric brake
control harness connector. The
harness will be located underneath
the dash and left of the steering
column. (A) taped to another
harness near the emergency brake
pedal. There will be a 4-pin connector
that mates with the brake control
connector.
2. Peel off tape and plug the vehicle
connector in to the brake control
connector.
3. Plug mating end of the brake control
connector into the brake control.
Wire to brake control by
function only. Color coding
is not standard among all
manufacturers. To ensure proper
installation, read brake control
instructions thoroughly.
A
53015
FIG. 1
WIRE CODE
White wire------ Ground
Blue wire-------- Electric brake
Black wire------ Battery
Red wire-------- Stop lamp switch
1. Locate the vehicle’s electric brake
control harness connector. The
harness will be located underneath
the dash and left of the steering
column. (A) taped to another
harness near the emergency brake
pedal. There will be a 4-pin connector
that mates with the brake control
connector.
2. Peel off tape and plug the vehicle
connector in to the brake control
connector.
3. Plug mating end of the brake control
connector into the brake control.
Wire to brake control by
function only. Color coding
is not standard among all
manufacturers. To ensure proper
installation, read brake control
instructions thoroughly.
A
53015
FIG. 1
WIRE CODE
White wire------ Ground
Blue wire-------- Electric brake
Black wire------ Battery
Red wire-------- Stop lamp switch
1. Locate the vehicle’s electric brake
control harness connector. The
harness will be located underneath
the dash and left of the steering
column. (A) taped to another
harness near the emergency brake
pedal. There will be a 4-pin connector
that mates with the brake control
connector.
2. Peel off tape and plug the vehicle
connector in to the brake control
connector.
3. Plug mating end of the brake control
connector into the brake control.
Wire to brake control by
function only. Color coding
is not standard among all
manufacturers. To ensure proper
installation, read brake control
instructions thoroughly.
A