Thank you for purchasing the smartness Trailer Camera Before operating your new product, please read these instructions carefully. This instruction manual contains information for safe use, installation and maintenance of the product Please keep this instruction manual in a safe place for future reference. This will ensure safe use and reduce the risk of injury.
TABLE OF CONTENTS 3 What's Included 11 Features 4 Physical installation 12 Troubleshooting 7 App Setup WHAT'S INCLUDED Trailer Samara Trailer Bracket Antenna Antenna Bracket 2 Stainless Steel Screws 2 Heat Shrink Connectors
PHYSICAL INSTALLATION Price to the installation, determine if you want to mount the camera behind an existing trailer light er hard mount to your trailer The universal mounting bracket is designed for both styles of installation. If you have a clearance/marker light on the back of the trailer already, we recommend putting the bracket behind the light With any other style of light, we recommend hard mounting the trailer camera to the trailer.
PHYSICAL INSTALLATION CON 1. Remove trailer light from back of trailer 2. Using one of the Heat Shrink Connectors, connect the wire from Trailer Camera to the POWER wire coming from the trailer/light 3. Using the second Heat Shrink Connector, connect the BLANK wire from the Trailer Camera to the NIEBUHR wire coming from the trailer/light 4.0nce wiring is complete, slide the clearance/ marker light through the universal mounting bracket and line up with the screw holes.
PHYSICAL INSTALLATION CONT'D & Place the camera in the bracket * Lisa on caners should be facing upwards, with antenna correction on the right side 7 Leave a “loop” or slack in the installation cable to help prevent water from getting into the trailer * We recommend applying silicone around the outside of the mounting bracket and trailer housing ta prevent water from getting nits the trailer 8 After installation is complete, adjust the camera to proper viewing angle by rotating the camera up or down by hand
Lula Set up your vueSMART™ Camera in the Hopkins Towing Solution® App The Hopkins Towing Solution® app will walk you through set-up and managing your vueSMART™ Trailer Camera Search for “Hopkins Towing Solutions” in the app store or download by scanning one of the GR codes for 105 for Android must hae 105 V8 or Android V5 oF ter
APP SET-UP CON'T Enter set-up information for your vueSMART™ Trailer Camera Once the app is fully downloaded, press the app icon on your smart device to open the app & Crass "BHT and enter your name, email, phone number and product serial number {located on back page of instructions).
Lua ele Connect your vueSMART™ to WiFi Ensure that your smartness” Trailer Camera your smart device settings and select WiFi Turn “G8” WiFi on your smart device and select the © "Hep king Towing Solutions” WF signal evn Enter password for WiFi FRINGES” fe case sensitive and you're good to go. Note: aww Remember, the WiFi signal is dedicated to your vueSMART™ Trailer Camera.
APP SET-UP CON'T Try It aut! After setup, go to the Hopkins Towing Solutions app to see what's behind your trailer! Smile, you may be on camera Next, make sure the camera is adjusted for optimal viewing Everything look hoed? Continue to the next section Something net eighty Jump ahead to the troubleshooting section *We recommend using a pane holder while operating the app
Fe Check out all of the exciting features! Here are some of the features of the smartness” Camera Aka z lecturers allows you to take a picture at any moment while using this product. All pictures save to your phone automatically Record a dives allows you to take a video at any moment while | using this product. All videos save to your phone automatically | Led brightness 3 brightness settings (off, 50%, 100%).
TROUBLESHOOTING 1 Why cans} obtains or a9 To semen WHEE | Henri 9 Bison t The ratifier caners has & bil in WIFI potshot No either network is needed and the camera toss not connect via Bluetooth 2 Tin semen dun nol urs a Reinstatement 1a # sic? The camera takes about 2 seconds to boot and prows an The LED wit be illuminated by defaulters each time the caners is powered on 3 Chow sw sonars quoth 6 hiya? Yas, & bright LESS around the camera support the carers ta work in law Termination bis ts sxe egos? Yo, the
WARRANTY INFORMATION CON 2. installation of any repaired or replaced product wil not be Hopkins responsibility If ys di rok allow the authorized dealer to inspect the product which i the subject of the warranty cairn, you wil invalidate tre warranty in rasp act of hat claim 9. Any repaired or replaced Hopkins product parts sail be shall be guarantor on the terms of this warranty for the undesired Gordon of tha reality period only 10.
Merci d’avoir acheta une caméra de remorque vueSMART™ Veuillez lire ces instructions attentivement avant d'utiliser votre nouveau produit. Le présent manuel d'instructions contient des renseignements sur utilisation, Installation et Entretien sécuritaires du produit Veuillez conserver ce mode d'emploi en lieu sir pour référence ultérieure. Sa consultation vous permettra d' utiliser le produit en toute sécurité et de réduire les risques de blessures.
TABLE DES MATIÈRES 18 Contenu 26 Caractéristiques 19 ~ Installation 27 Dépannage 22 Configuration de Application Hie Caméra de remordue Support pour relargue Antenne Support pour antenne W 2 Connecteurs thermorétractables oF 2 Vis en acier inoxydable
INSTALLATION Avant Installation, déterminer si la caméra sera installée derrière un feu de remorque existant ou directement sur la remorque Le support de montage universel est conçu pour les deux types d'installation. S’il a déjà un feu de gabarit/de position & Équarrier de la remorque, nous recommandons de placer le support derrière le feu Avec tout autre type de feu, nous recommandons de fixer la caméra directement & la remorque.
pal REE ET A 1. Retirer le feu de remorque & Garrigue de la remordue 2. En utilisant un des connecteurs thermorétractables, connecter le fil ROU carmera de la remorque au fil provenant de la remorque/du feu 3. En utilisant le deuxième connecteur } thermorétractable, raccorder le fil #ik de la caméra de remorque au fil BE TERRE provenant de la remorque/du feu 4. Une fois le ciblage terminé, glisser le feu de gabarit/ de position dans le support de montage universel et l'aligner avec les trous de vis.
Placer la caméra dans le support * Le loge de ia camera doit tors orients vers le haut, aber a connexion d'antenne du cB droit 7. Laisser une « boucle » ou un jeu dans le câble d'installation pour aider 3 empêcher l’eau de pénétrer dans la remorque * Nous recommandons rappliquer de la silicone autour du support de montage st du baller de feu relargue pour tire que sau pénétra tans i remorque 8. Après Installation, régler l’angle de prise de vue de la caméra en la faisant pivoter verticalement a la main 9.
CONFIGURATION DE L’APPLICATION [SUITE] Entrer Information de configuration pour la caméra de remarque vueSMART™ Une fois Application entièrement téléchargée, appuyer sur l’icône correspondante sur votre appareil intelligent pour Ouvrir Appuyer sur « £#TER » [entrer) et saisir votre nom, votre adresse courriel, votre numéro de téléphone et le numéro de série du produit [3 ladrerie des instructions].
CONFIGURATION DE L’APPLICATION [SUITE] Connecter la caméra vue Smart” au réseau Wi-Fi S'assurer que la caméra de remorque vueSMART™ est allumée. Accéder aux paramétrés de l'appareil intelligent et sélectionner Wi-Fi «© Activer option Wi-Fi (« 23 ») sur Appareil intelligent at sélectionner le signal Wi-Fi « § Rowing Pr Sortis » we ava ave Saisir le mot de passe Wi-Fi « HIPRIMEMFS », ef le tour est joué.
CONFIGURATION DE L’APPLICATION [SUITE] Essayez Application! Après la configuration, accéder a Application Hopkinson Rowing Solutions= pour voir ce qui se trouve derrière la remorque! Souriez, vous pourriez tre & la caméra S'assurer ensuite gue la caméra est réglée pour une vision optimale Tout semble bled Passer 3 la section suivante Dus logue chose ne vs pas? Aller A la section Dépannage * Nous recommandons ‘utiliser un support pour téléphone pendant Utilisation de (application
Eh Découvrez toutes les caractéristiques intéressantes! Voici quelques-unes des caractéristiques de la caméra vueSMART® FrAndroid une phots Permet de prendre une photo 3 tout moment pendant utilisation de la caméra. Toutes les phots sont enregistrées automatiquement sur votre téléphone Enregistrer une vidés Permet de faire une vidéo 3 tout moment pendant Utilisation de la caméra.
FL ht a ted ea Tis is te Camera 0 Number for your warranty "Mort forget iu register your warranty In the Ap: 1 gait sis numerous identification de la camera pour voter quarantine.