Installation Instructions

76
ASSEMBLY STEP 1 (Adventure 7)
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION QTY
A BOLT M8X1.25PX60L-30L 3
1
A
2
3
NOTE: Do not assemble CONSOLE MAST COVER
BOLTS (I) at this step.
A Cut the yellow banding straps and lift the
running deck upward to remove all contents
from underneath the running deck.
B Open HARDWARE FOR STEP 1.
C Attach LEFT CONSOLE MAST (1) to MAIN
FRAME (2) using 3 BOLTS (A)฀ and do not
tight these 3 BOLTS (A).
D Carefully slid down the LEFT CONSOLE MAST
COVER (3) to LEFT CONSOLE MAST (1).
ASSEMBLY STEP 2 (Adventure 7)
HARDWARE FOR STEP 2
PART TYPE DESCRIPTION QTY
A BOLT M8X1.25PX60L-30L 3
5
A
4
6
10
7
NOTE: Do not assemble CONSOLE MAST COVER
BOLTS (I) at this step.
A Pull the BASE CABLE (5) away from the
treadmill base frame. Connect the CONSOLE
CABLE (5) from the MAIN FRAME (4) to the
CONSOLE CABLE (5) in the bottom of the
RIGHT CONSOLE MAST (6). The other end of
the CONSOLE CABLE (10) should be located
at the top of the mast.
B Open HARDWARE FOR STEP 2.
C Attach RIGHT CONSOLE MAST (6) to MAIN
FRAME (4) using 3 BOLTS (A), and do not
tight these 3 BOLTS (A).
D Carefully slid down the RIGHT CONSOLE
MAST COVER (7) to RIGHT CONSOLE MAST
(6).
Adventure
7
shown
Adventure
7
shown
HZ15_AG_Adv_1_3_5_7_r1_0.indd 6-7 7/13/15 2:41 PM