Installation Instructions

76
HANDLEBARS
SEAT BACK
SEAT BASE
CRANK
REAR STABILIZER
FRONT STABILIZER TUBE
CONSOLE
CONSOLE MAST
PULSE GRIP HANDLEBARS
WATER BOTTLE HOLDER
SEAT POSITION
ADJUSTMENT LEVER
CONSOLE MAST GROMMET
MAIN FRAME
POWER CORD SOCKET
TRANSPORT WHEELS
PEDALS
CAUTION ACHTUNG
KEEP HANDS AND FEET AWAY
FROM THE MOVING PARTS.
HALTEN SIE HÄNDE UND FÜSSE
VON BEWEGLICHEN TEILEN FERN.
WARNING
Consult a physician prior to
using any exercise equipment.
Possibility of serious injury if
equipment is used improperly.
Heart rate monitoring systems
may be inaccurate. Over
exercise may result in serious
injury or death. Stop exercising
if you feel pain, faint, dizzy or
short of breath. Read Owner’s
Manual before using. Keep
children off and away from this
equipment. This machine is
designed for Home-use only, do
not use for club or therapeutic
purposes.
Konsultieren Sie einen Arzt,
bevor Sie mit dem Training
beginnen. Bei unsachgemäßem
Gebrauch kann es zu
ernsthaften Verletzungen
kommen. Herzfrequenzüberwa-
chungssysteme können
ungenau sein. Übermäßiges
Training kann zu ernsthaften
Verletzungen oder zum Tod
führen. Beenden Sie Ihr
Training, wenn Sie Schmerzen,
Übelkeit, Schindel oder
Atemnot verspüren. Lesen Sie
vor der Erstbenutzung die
Bedienungsanleitung. Halten
Sie Kinder vom Trainingsgerät
fern. Nur für den Heimgebrauch.
TOOLS REQUIRED:
F 13/15mm Flat Wrench/Screwdriver
F 5mm L-Wrench
F 6mm L-Wrench
PARTS INCLUDED:
F 1 Main Frame
F 1 Console
F 1 Console Mast
F 1 Console Mast Grommet
F 1 Water Bottle Holder
F 1 Front Stabilizer Tube
F 1 Rear Stabilizer Tube
F 1 Seat Base
F 1 Seat Back
F 1 Seat Frame
F 1 Seat Frame Cover
F 1 Pulse Grip Handlebars
F 2 Pedals with Straps
F 1 Audio Adapter Cable
F 1 Power Cord
F 1 Hardware Kit
UNPACKING
Unpack the product where you will be using it. Place the bike carton on a level
flat surface. It is recommended that you place a protective covering on your floor.
Never open box when it is on its side.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded. It is recommended you complete the full assembly of your unit
before completely tightening any ONE bolt.
Several parts have been pre-lubricated to aid in assembly and usage. Please do
not wipe this off. If you have difficulty, a light application of lithium bike grease is
recommended.
If you have questions or if there are any missing parts, contact your local dealer.
Contact information may be located on the back panel of your manual or on
the warranty card.
NEED HELP?
RECUMBENT BIKE PRE ASSEMBLY
Comfort R
Comfort Ri
Comfort
Recumbent
Bike