Operating Instructions and Installation Instructions
13
BOLT (Z)
FLAT WASHER (X)
NUT (AA)
LOWER HANDLEBAR
SPRING WASHER (Y)
TEFLON WASHERS (W)
LOWER LINK ARM
ALL
MODELS
ENDURANCE 5 SHOWN
A Open hardware bag 6.
B Align end of lower linK arm with bracket on
bottom of lower handlebar.
C Place teflon washers (w) on both sides
of the lower linK arm. While holding
teflon washers (w) slide lower linK
arm into bottom end of lower handlebar.
D Secure the joint with 1 flat washer (X), 1
spring washer (y),1 bolt (z) and secure
with 1 nut (aa).
E Repeat steps B–D on the opposite side of the
elliptical.
SPRING WASHER (Y)
15 mm
Qty: 2
TEFLON
WASHER (W)
28.4 mm
Qty: 4
FLAT WASHER (X)
17 mm
Qty: 2
NUT (AA)
Qty: 2
BOLT (Z)
70 mm
Qty: 2
HARDWARE BAG 6 CONTENTS :
ASSEMBLY STEP 6