User's Manual

3. Specifications
Parameter Value Units
Storage Temp -65 to 105 Degrees Celsius
VDD 2.4 to 3.6 Volts
Receive Sensitivity -95 dBm
Transmit power (conducted) 17 dBm MAX
Transmit power (radiated) 19 dBm MAX
Idle current 1 mA
Receive current 22 mA
Transmit current 200 mA
4. Block Diagram
Framer
Interface
Buffer
DSSS
Modem
VCO
Xtal
SE2550BL Power
Amplifier
CYWUSB6936 DSSS
2.4GHz Radio
2dBi
Antenna
12MHz
FCC ID: BRWDSMTX10
System
Interface
Horizon Hobby
X1TXM
Module Block Diagram
Power
Regulator
Power
Regulator
5. Module User Requirements
5.1 This module must be integrated into a device where the user cannot access the
antenna connector.
5.2 Only a 2dBi antenna can be used with this module. The antenna must meet and not
exceed the gain and pattern of the supplied Inpaq DAM00BM11500209 folded dipole
antenna.
5.3 Changes or modifications to the module that are not expressly approved by Horizon
Hobby could void the user’s authority to operate the equipment.
5.4 The device must contain the following permanent labeling on the exterior of the
device as follows: