User's Manual

5. With the transmitter off, place the transmitter sticks and auxiliary channels in their

desired fail-safe positions, normally brake and straight ahead steering.

6. Press and hold the bind button on the

transmitter module.

7. Turn on the transmitter while holding

the bind button.

8. Release the bind button after the green

LED ﬂashes.

Observe that after several seconds the LED on the receiver and the LED on the

transmitter will quit ﬂashing and remain solid, indicating that the binding process

was successful. Once binding is complete, the system will automatically connect.

Only bound receivers and modules can connect. During power-up, the transmitter

scans for a free channel while the receiver scans for its bound transmitter. During

scanning, the LEDs on both transmitter and receiver ﬂash rapidly. After sucessful

binding is achieved, the LED remains on continuously.

Binding Process

(continued)