User Manual

13
C
1
4
5
3
ASSEMBLY STEP 4
A Open HARDWARE FOR STEP 4.
B Gently place CONSOLE (5) on top of
CONSOLE MASTS (1 & 4).
C Connect the CONSOLE CABLES (3) and
ensure cables are tucked inside the CONSOLE
(5).
D Connect the CONSOLE (5) to the right
CONSOLE MAST (4) using 2 BOLTS (C).
E Repeat STEP D on left side.
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
C HEX SOCKET BOLT M8X1.25PX15L 4
NOTE: Be careful not to pinch the console
cables while attaching the console.
ASSEMBLY COMPLETE!
Before the first use, lubricate the treadmill
deck by following the instructions in
the MAINTENANCE section in the
TREADMILL GUIDE.