Manual

IMPORTANT..READTHESESAFETYINSTRUCTIONSBEFOREUSE!
Thereare several areas during the assembly process of a elliotical that special attention must be paid. It is
very important to follow the assembly instructions correctly and to make sure aft parts are firmly tightened.
If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not
tightened and will seem loose and may cause irritating noises. Toprevent damage to the elliptical the
assembly instructions must be reviewed and corrective actions should be taken.
UNPACKING
Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended
that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and
bolts are in place and partially threaded in before completely tightening any ONEbolt.
NOTE:A light application of greasemay aid in the installation of hardware.Anygrease, such as lithium
bike greaseis recommended.
Before proceeding, find you_ eilipticai's seriai number
i iocated on the front stabilizer tube and enter it in the
i space provided below. Also locate the modelname
i which is Iocated on the side cover badge,
ENTERYOURSERIALNUMBER
, MODELNAMEINTHEBOXESBELOW:
MODELNAME:
Referto the SERIALNUMBERand MODELNAMEwhencalfing for service.
Alsoenterthis serial numberonyour WarrantyCard.