Operation Manual

The LED will ﬂash slowly in blue.–

If the radio code is recognised, the LED –

ﬂashes quickly in blue.

After 2 seconds, the LED goes out.–

NOTE:

You have 15 seconds to inherit / transmit the code.

The process must be repeated if the radio code is not

successfully inherited / transmitted within this time.

Mixed operation / BiSecur and ﬁxed 7.2

code 868 MHz

If the BiSecur radio has been set, mixed operation

with HS 4 BiSecur hand transmitters is possible, i.e.

existing hand transmitters with an 868 MHz ﬁxed

code (grey hand transmitters with blue buttons or the

device designation HSD2-868) can be taught in from

the BiSecur hand transmitter.

Reset8

Each hand transmitter button is assigned to a new

radio code by means of the following steps.

Open the battery lid and remove the battery for 1.

10 seconds.

Press a hand transmitter button and keep it 2.

pressed.

Insert the battery and close the battery lid.3.

The LED slowly ﬂashes in blue for 4 seconds.–

The LED ﬂashes rapidly in blue for 2 seconds.–

The LED is illuminated blue for a long time.–

Release the hand transmitter button.4.

All radio codes are newly assigned.

NOTE:

If the hand transmitter button is released prematurely,

no new radio codes are assigned.

TR20A088 RE / 02.2012 21

ENGLISH