Operation Manual

Set the ﬁxed code 868 MHz8.1

If immediately following the device reset, the hand

transmitter button remains pressed, the ﬁxed code

868 MHz will be activated.

The LED slowly ﬂashes in red for 4 seconds.–

The LED ﬂashes rapidly in red for 2 seconds.–

The LED is illuminated red for a long time.–

All radio codes are newly assigned.

NOTE:

If the hand transmitter button is released prematurely,

the BiSecur radio will remain active.

Further information about operating the hand

transmitter with the ﬁxed code 868 MHz can be found

on the Internet at www.hoermann.com

LED display9

Blue (BU)

Condition Function

Illuminated for 2 seconds A radio code is being

transmitted

Flashes slowly Hand transmitter is in the

learn mode

Flashes quickly after

slow ﬂashing

A valid radio code was

discovered during the

learning

Flashes slowly for

4 seconds

Flashes quickly for

2 seconds

Illuminated long

Device reset is being

performed or completed

22 TR20A088 RE / 02.2012

ENGLISH