Operation Manual

C
1
Hand transmitter RSC 2 (including hand transmitter holder)
This hand transmitter works with a rolling code (frequency: 433 MHz) that changes
with each sending procedure. The hand transmitter is equipped with two buttons, i.e.
you can use the second button to open another gate (double-leaf system).
C
2
Hand transmitter RSZ 1
This hand transmitter is for insertion in a vehicle cigarette lighter. The hand
transmitter works with a rolling code (frequency: 433 MHz) that changes with each
sending procedure.
C
3
Radio code switch RCT 3b
Up to 3 gate operators can be wirelessly operated via impulse using the illuminated
radio code switch. This does away with the time-consuming need to lay cables.
C
4
Surface-mounted/recessed key switch
You can use the key switch to operate the hinged gate operator from the outside with
a key. Two versions in one device – surface-mounted or recessed.
C
5
Receiver RERI 1 / RERE 1
This 1-channel receiver enables operation of a hinged gate operator with one
hundred additional hand transmitters (buttons).
Memory spaces: 100
Frequency: 433 MHz (rolling code)
Operating voltage: 24 V AC/DC or 230/240 V AC
Relay output: On/off
C
6
One-way photocell EL 301
For outside use as additional safety equipment.
Including 2 x 10 m connecting lead (2-wire) and fixing material.
C
7
Sound-absorbing seal set DP 21/DP 22
Profile for additional closing edge safety.
DP 21 for a max. gate height of 1000 mm, DP 22 for a max. gate height of 2000 mm.
Set includes:
1 sound-absorbing seal DP 2 in the appropriate length•
1 C-profile in the appropriate length•
22
TR10L012-A RE / 05.2010
ENGLISH