Operation Instruction

Rev:01

Page 1

Main Function

：

1. Three levels of environmental comfort display

2. Interior Temperature, sensing range: -10℃ -- 70℃

3. Interior Humidity, sensing range: 10% -- 99%

4. External Temperature, sensing range: -10℃ -- 70℃

5. External Humidity, sensing range: 10% -- 99%

Key Operation Instruction

：

Function

Operation

C/F

ALLTIME/24HR

REMOTE/BASE

Standard

Mode

Quick press

Switch the

Temperature

display unit

Switching maximum

and minimum data

memory time

Switch indoor/outdoor

display data

Press and

Hold

Non-effect

Erase the memory data

Enable the normal receive

mode for 3 minutes

PAGE 1
Main Function： 1. 2. 3. 4. 5.
PAGE 2
Indoor comfort function: Make pattern changes according to the corresponding humidity data Any humidity less than 30%, is DRY Any humidity higher than 60%, is WET Any humidity higher than 30% and less than 60% , is COMF Easy operation Guide: Step 1:Installing the AAA battery for the wireless hygrometer and remote sensor to get them powe red. Step 2:The base and remote will automatically attempt to pair within 3 minutes.
PAGE 3
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.