Operation Instruction

Rev:01
Page 2
Indoor comfort function:
Make pattern changes according to the corresponding humidity data
Any humidity less than 30%, is DRY
Any humidity higher than 60%, is WET
Any humidity higher than 30% and less than 60% , is COMF
Easy operation Guide:
Step 1:Installing the AAA battery for the wireless hygrometer and remote sensor to get them powe
red.
Step 2:The base and remote will automatically attempt to pair within 3 minutes.
Step 3:If the two devices failed to match the signal, then press and hold the ‘REMOTE/BASE’ butt
on to Manually re-connection.
Step 4:When successful connection, You might notice the Wireless signal in the upper left corner o
f the screen and it blinks twice every 50 seconds.