User Manual

MAN0798-04-EN CH. 10
August 20, 2009 Page 61 of 95 ECN # 979
Figure 10-9 – Example application segment for safe removal of removable media
10.9 OK and Run Status
Since the QX does not provide external LEDs for the Ok and Run status of the configuration and ladder
logic engine (respectfully), an optional pop-up may be enabled to warn the user that one of these two
status indications has changed. When enabled in the system menu, a status change is indicated as
shown in figure 10.10.
Figure 10-10 – OK and RUN Status
To remove the popup, simply touch the OK button. If either the Ok or Run indicator is reset, the operator
may consult the system menu diagnostic screen to determine the problem.