Instruction Manual

MAN0970-04-EN HE-RCC972 Specifications / Installation
1 Specifications
Specifications
Digital DC Inputs
RCC972
Digital DC Outputs
RCC972
Inputs per Module
8
Outputs per Module
4
Input Voltage Range
12 VDC / 24 VDC
Output Type
Sourcing / 10 K Pull-Down
Absolute Max. Voltage
35 VDC Max.
Absolute Max. Voltage
28 VDC Max
Input Impedance
10 kΩ
Output Protection
Short Circuit
Input Current
Positive Logic
Max. Output Current per point
0.5 A
Upper Threshold
0.8 mA
-1.6mA
Max. Total Current
2 A Continuous
Lower Threshold 0.3 mA -2.1mA Max. Output Supply Voltage 30 VDC
Max Upper Threshold 8 VDC
Minimum Output Supply
Voltage
10 VDC
Min Lower Threshold 3 VDC
Max. Voltage Drop at Rated
Current
0.25 VDC
OFF to ON Response Scan rate dependent Max. Inrush Current 650 mA per channel
ON to OFF Response
Scan rate dependent
Min. Load
None
OFF to ON Response
Scan rate dependent
ON to OFF Response
Scan rate dependent
Output Characteristics
Current Sourcing (Pos logic)
Analog Inputs
RCC972
Analog Outputs
RCC972
Number of Channels
8
Outputs per Module
4
Input Range
0 – 20 mA
Output Ranges
0- 20 mA.
Maximum input resistance
72 Ω
(Clamped @ -0.5 VDC to 6 VDC)
Minimum Current load 500Ω
Safe input voltage range *
±30V dc.
Galvanic Isolation
None
Negative Logic
12 Bits
Nominal Resolution
12 Bits
%AI full scale
0 - 32,000 counts
%AQ full scale
0 - 32,000 counts
Max. Over-Current
35 mA
Response Time
One update per ladder scan
Accuracy (% of full scale)
1.00%
Accuracy (% of full scale)
0.5%
Max. Error at 25°C
(excluding zero)
1.5% of full scale.
Max. Error at 25°C
(excluding zero)
0.25% of full scale.
Conversion rate
All channels converted once per
ladder scan
Conversion rate
All channels converted once per
ladder scan
Filtering
160 Hz hash (noise) filter
1-128 scan digital running average
filter
Register type No. of Registers Register type No. of Registers
%R
4096
%I, %Q
2048
%T, %M
2048
%AI, %AQ
512
%S
13
Network Digital In/Out
64 per ID
%SR
1-192, 200-205
Network Analog In/Out
32 per ID
Fieldbus
Ethernet
CAN Hardware
Version 2.0
Ethernet Connector
RJ45, Auto MDIX
Protocols CsCan Protocols
See Ethernet manual
ETN200 / ETN300
Baudrate
125KBd, 250KBd, 500KBd,1MBd
Baudrate
10/100Mbit
General Specification
Operating Voltage Range
10 – 32 VDC
Serial Port
1 x RS232 port, RJ45
Required
Power
(Steady State)
130 mA @ 24 VDC
Program Memory Size
128 KBytes
Removable Memory Type
microSD, 32GB
Required Power (Inrush) 30 A for 1 ms @ 24 VDC
Housing Type
Plastic (UL 50 rated, flame retardant,
UV resistant.)
Operating Temperature
-10° to 60°C
Mounting
DIN Rail / Panel mounting
Storage Temperature
-10° to 70°C
Terminal Type
Spring clamp 0.2” / 5.08 mm
Removable
Relative Humidity
5 to 95% Non-condensing
Battery backed
No
Weight
10 oz. (325.0 g)
Switches
1-Run/Idle, 2-Load
UL
coming soon
LED’s
1-Power, 2- OK, 3- Run
CE
See Compliance Table at http://www.heapg.com/Support/compliance.htm
http://www.horner-apg.com/en/support/certification.aspx
• Do not apply external voltage without a load.
HE-RCC972 Compact Controller
8 Digital DC Inputs / 4 Digital Outputs
8 Analog Inputs / 4 Analog Outputs
1 CAN port (CsCan protocol)
1 Ethernet Port (webserver, Modbus TCP, email)
Page 1 of 4 ECN
No part of this publication may be reproduced without the prior agreement and written permission of Horner APG, Inc. Information in this document is subject to change without notice.