Manual

MAN0292-08 10 NOV 2006 PAGE 1
MIX902
This Data Sheet is published individually & also as a part of the SmartStack Supplement (SUP0246-05).
Information is subject to change without notice. SmartStack is a trademark of Horner APG, LLC.
This datasheet also covers products starting with IC300.
1 SPECIFICATIONS
ANALOG INPUT MIX902 MIX902
Number of Channels
4
Analog Inputs
Input Points Required
4
Input Ranges
(including
over-range)
Nominal: 0-20.47mA
Conversion Time
(PLC Update Rate)
Set by PLC Scan Time
Resolution 12-Bits
Converter Type
Successive
Approximation
Input Impedance
200 Ohms < 12VDC,
Clamped @ 12VDC,
35mA Max. Continuous
Additional error for
temperatures other than
25°C
0.01% / °C
Maximum Error at
25°C
0.1% Maximum Over-Current 35mA
DIGITAL INPUT
Inputs per Module 8 Input Characteristics Bidirectional
Commons per
Module
1
Input Impedance 10K Ohms
Input Voltage Range 12-24VDC
Minimum ON Current 1mA
Peak Voltage
35VDC Max. Maximum OFF Current
200µA
Isolation
(Channel to Channel
and Channel to
Common)
500VDC
OFF to ON Response 1ms.
ON Voltage Level 9VDC
OFF Voltage Level 3VDC
ON to OFF Response 1ms.
ANALOG OUTPUT
Number of Channels
2
Analog Outputs;
Output Points Required
2
Output Ranges
(including over-
range)
20.47mA;
Clamped @-0.5 - +33VDC
Nominal
Additional error for
temperatures other than
25°C
0.01% / °C
Resolution 12 Bits
Output Voltage 4 - 30VDC
Maximum Error at 25°C
0.1%
(Note: Used 2% error
under EMC testing.)
DIGITAL OUTPUT MIX902
MIX902
Outputs per Module 8 Maximum Inrush Current 650mA
Commons per
Module
1
Minimum Load None
Operating Voltage 10 - 28VDC OFF to ON Response 1ms.
Output Type Sourcing / 10K Pull-Down ON to OFF Response 1ms.
Peak Voltage 28VDC Max. Output Characteristics Current Sourcing
24VDC Bipolar Digital In
10-28VDC, 0.5A Sourcing Digital Out
4-20mA Analog In/Out
HE800MIX902 / HE-MIX902*
* HE- denotes plastic case.