User guide

MAN0897-01 Specifications / Installation
______________________________________________________________________________________________________
03/02/2009 Page 2 of 2 ECN # 952
6 WIRING
DQM602 Relay Outputs
Number of output points 16
Minimum load voltage /
current
5VDC / 1mA
Commons per Module 2
Maximum Load Current
(resistive)
2.0A per channel
5.0A per common
Rated Load Voltage
24VDC,
220VAC
OFF to ON Response 10ms. Max.
Rated Voltage
11 – 25
VDC
ON to OFF Response 12ms. Max.
Output Type N.O.
Internal power
Consumption (mA)
550mA
Weight 9.91oz. (281 g)
7 INTERNAL WIRING
Specification for transient voltage suppressors (transorbs) used on output circuitry is
400VDC, bi-directional 400 watts.
Electro-mechanical relays comply with IEC1131-2.
8 DECIMAL (DEC) TO HEXADECIMAL (HEX) CONVERSION TABLE
Dec Hex Dec Hex Dec Hex
HI LO HI LO HI LO
0 0 0 86 5 6 172 A C
1 0 1 87 5 7 173 A D
2 0 2 88 5 8 174 A E
3 0 3 89 5 9 175 A F
4 0 4 90 5 A 176 B 0
5 0 5 91 5 B 177 B 1
6 0 6 92 5 C 178 B 2
7 0 7 93 5 D 179 B 3
8 0 8 94 5 E 180 B 4
9 0 9 95 5 F 181 B 5
10 0 A 96 6 0 182 B 6
11 0 B 97 6 1 183 B 7
12 0 C 98 6 2 184 B 8
13 0 D 99 6 3 185 B 9
14 0 E 100 6 4 186 B A
15 0 F 101 6 5 187 B B
16 1 0 102 6 6 188 B C
17 1 1 103 6 7 189 B D
18 1 2 104 6 8 190 B E
19 1 3 105 6 9 191 B F
20 1 4 106 6 A 192 C 0
21 1 5 107 6 B 193 C 1
22 1 6 108 6 C 194 C 2
23 1 7 109 6 D 195 C 3
24 1 8 110 6 E 196 C 4
25 1 9 111 6 F 197 C 5
26 1 A 112 7 0 198 C 6
27 1 B 113 7 1 199 C 7
28 1 C 114 7 2 200 C 8
29 1 D 115 7 3 201 C 9
30 1 E 116 7 4 202 C A
31 1 F 117 7 5 203 C B
32 2 0 118 7 6 204 C C
33 2 1 119 7 7 205 C D
34 2 2 120 7 8 206 C E
35 2 3 121 7 9 207 C F
36 2 4 122 7 A 208 D 0
37 2 5 123 7 B 209 D 1
38 2 6 124 7 C 210 D 2
39 2 7 125 7 D 211 D 3
40 2 8 126 7 E 212 D 4
41 2 9 127 7 F 213 D 5
42 2 A 128 8 0 214 D 6
43 2 B 129 8 1 215 D 7
44 2 C 130 8 2 216 D 8
45 2 D 131 8 3 217 D 9
46 2 E 132 8 4 218 D A
47 2 F 133 8 5 219 D B
48 3 0 134 8 6 220 D C
49 3 1 135 8 7 221 D D
50 3 2 136 8 8 222 D E
51 3 3 137 8 9 223 D F
52 3 4 138 8 A 224 E 0
53 3 5 139 8 B 225 E 1
54 3 6 140 8 C 226 E 2
55 3 7 141 8 D 227 E 3
56 3 8 142 8 E 228 E 4
57 3 9 143 8 F 229 E 5
58 3 A 144 9 0 230 E 6
59 3 B 145 9 1 231 E 7
60 3 C 146 9 2 232 E 8
61 3 D 147 9 3 233 E 9
62 3 E 148 9 4 234 E A
63 3 F 149 9 5 235 E B
64 4 0 150 9 6 236 E C
65 4 1 151 9 7 237 E D
66 4 2 152 9 8 238 E E
67 4 3 153 9 9 239 E F
68 4 4 154 9 A 240 F 0
69 4 5 155 9 B 241 F 1
70 4 6 156 9 C 242 F 2
71 4 7 157 9 D 243 F 3
72 4 8 158 9 E 244 F 4
73 4 9 159 9 F 245 F 5
74 4 A 160 A 0 246 F 6
75 4 B 161 A 1 247 F 7
76 4 C 162 A 2 248 F 8
77 4 D 163 A 3 249 F 9
78 4 E 164 A 4 250 F A
79 4 F 165 A 5 251 F B
80 5 0 166 A 6 252 F C
81 5 1 167 A 7 253 F D
82 5 2 168 A 8 254 F E
83 5 3 169 A 9 255 F F
84 5 4 170 A A
85 5 5 171 A B
9 INSTALLATION / SAFETY
a. All applicable codes and standards need to be followed in the installation of
this product.
b. For I/O wiring (discrete), use the following wire type or equivalent: Belden
8441 or equivalent.
c. For detailed installation information, refer to Chapter Two in the Control
Station Hardware Manual (MAN0227). A
handy checklist is provided that
covers panel box layout requirements and minimum clearances.
10 TECHNICAL ASSISTANCE
For assistance and manual updates, contact Technical Support at the following locations:
North America:
Tel: [phone]
Fax: [phone]
Web:
http://www.heapg.com
Email:
[e-mail]
Europe:
Tel: [phone]
Fax: [phone]
Web:
http://www.horner-apg.com
Email: [e-mail]
Warning: Consult user
documentation.
Warning: Electrical Shock Hazard.
Warning: To protect the module and associated wiring from load faults, use external
fuse (5 A).
Warning: Connecting high voltage to any I/O pin may cause high voltage to appear
at other I/O pins.
Warning: Wiring the line side of the AC source to loads connected to outputs 0
through 15 and the neutral side of the AC source to the output common(s)
would create a Negative Logic condition, which may be considered an
unsafe practice.
Cscape, SmartStix and CsCAN are trademarks of Horner APG. This information is
sub
j
ect to chan
g
e without notice.
+
-
I/O Connector
C1
Q1
Field
Side
SmartStix
To
Controller
Signal
Pin
DQM602
NC*
No Connection
(*Do not Connect)
FG Frame Ground
NC*
No Connection
(*Do not Connect)
NC No Connection
NC No Connection
NC No Connection
NC No Connection
NC No Connection
NC No Connection
Q1 Output 1
Q2 Output 2
C1 Common 1
Q3 Output 3
Q4 Output 4
C1 Common 1
Q5 Output 5
Q6 Output 6
C1 Common 1
Q7 Output 7
Q8 Output 8
C1 Common 1
NC No Connection
C1 Common 1
Q9 Output 9
Q10 Output 10
C2 Common 2
Q11 Output 11
Q12 Output 12
C2 Common 2
Q13 Output 13
Q14 Output 14
C2 Common 3
Q15 Output 15
Q16 Output 16
C2 Common 2
NC No Connection
C2 Common 2
NC No Connection
FG
C1
Q3
Q8
Q4
C1
Q5
Q6
Q1
Q2
C1
Q7
C2
NC
C2
NC
C2
C2
C2
Q15
Q9
C1
NC
NC
NC
NC
NC
NC
NC
LOAD
220VAC
OR
24VDC
N
L
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
220VAC
OR
24VDC
N
L
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
LOAD
C1
Q14
Q11
Q10
Q16
Q13
Q12
006DQM008-R1
NC
NC