User guide

ManualsBrandsHorner APG ManualsSensorsXL4 OCS

MAN0963-07EN

Specifications / Installation

XL4 OCS

Datasheet for

HE-XC1E0, HE-XC1E2, HE-XC1E3, HE-XC1E4, HE-XC1E5

HEXT251C100, HEXT251C112, HEXT251C113, HEXT251C114, HEXT251C115

General Specifications

Control & Logic Specifications

Required Power

(Steady state)

95 mA @ 24 VDC

190 mA @ 12 VDC

Control Language Support

Advanced Ladder Logic

Full IEC 1131-3 Languages

Required Power

(Inrush)

2A for <1 ms @ 24 VDC

DC Switched

Logic Program Size

& Logic Scan Rate

1MB, maximum

0.013mS/K

Primary Power Range

10 – 30 VDC

Online Programming Changes

Supported in Advanced Ladder

Relative Humidity

5 to 95% Non-condensing

I/O Support

Digital Inputs

2048

Clock Accuracy

+/- 20 ppm maximum at 25° C

(+/- 1 Minutes per Month)

Digital Outputs

2048

Analog Inputs

512

Surrounding Air Temp

-10°C to +60°C

Analog Outputs

512

Storage Temp

-30°C to +70°C

General Purpose Registers

50,000 (words) Retentive

Weight

12 oz. (340 g)

16,384 (bits) Retentive

UL / CE

USA: http://www.heapg.com/Pages/TechSupport/ProductCert.html

16,384 (bits) Non-retentive

Europe: http://www.horner-apg.com/en/support/certification.aspx

Display Specifications

Connectivity

Display Type

3.5” TFT Transmissive Color

Serial Ports

1 RS-232 & 1 RS-485 on single Modular Jack

Resolution

QVGA (320x240)

USB mini-B

USB 2.0 (480MHz) Programming & Data Access

Color

16-bit (65,535)

USB A

USB 2.0 (480MHz) for USB FLASH Drives (2TB)

Screen Memory

64MB

CAN

Remote I/O, Peer-to-Peer Comms, Cscape

User-Programmable

Screens

1023

Ethernet

10/100 Mb (Auto-MDX)

Modbus TCP C/S, HTTP, FTP, SMTP, Cscape

Backlight

LED – 50,000 hour life

Remote I/O

SmartRail, SmartStix, SmartBlock, SmartMod

Screen Update Rate

User Configurable within the scan time.

(perceived as instantaneous in many cases)

Removable

Memory

MicroSD, support for >32GB max.

Application Updates, Datalogging, more

Input / Output Specifications

Model

DC In

Out

Relays

HS In

HS Out

mA/V

RTD/Tc

mA/V

Out

High-Speed Counters

Number of Counters

Model 2

Maximum Frequency

>500kHz each

Model 3

Accumulator Size

32-bits each

Model 4

Modes Supported

Model 5

Totalizer

Quadrature

There are 4 high-speed inputs of the total DC Inputs. There are 2 high-speed outputs of the total

DC outputs. Model 2, 3 & 4 feature 12-bit Analog I/O. Model 5 features 14/16-bit Analog I/O.

High-speed Outputs can be used for PWM and Pulse Train Outputs, currently limited to <65kHz.

Pulse Meas.

Frequency Meas.

2 Position Controlled Outputs

1 ON/OFF Setpoint per Output

1 Specifications

2 Dimensions & Panel Cutout

Cutout tolerance to meet NEMA

standards is ±

0.005” (0.1mm).

Max. Panel Thickness is 5mm.

Panel Cutout

August 23, 2012

Specifications / Installation

Page 1 of 6

3.622 [92mm]

001XLE002

Summary of content (6 pages)

PAGE 1
MAN0963-07EN Specifications / Installation XL4 OCS Datasheet for HE-XC1E0, HE-XC1E2, HE-XC1E3, HE-XC1E4, HE-XC1E5 HEXT251C100, HEXT251C112, HEXT251C113, HEXT251C114, HEXT251C115 1 Specifications Required Power (Steady state) Required Power (Inrush) Primary Power Range Relative Humidity Clock Accuracy Surrounding Air Temp Storage Temp Weight UL / CE General Specifications 95 mA @ 24 VDC 190 mA @ 12 VDC 2A for <1 ms @ 24 VDC DC Switched 10 – 30 VDC 5 to 95% Non-condensing +/- 20 ppm maximum at 25° C (+/- 1
PAGE 2
MAN0963-07EN Specifications / Installation 3 Installation Procedures 1. Carefully locate an appropriate place to mount the XL4. Be sure to leave enough room at the top of the unit for insertion and removal of the microSD card. Also leave enough room at the bottom for the insertion and removal of USB FLASH drives 2. Carefully cut the host panel per the diagram on Page 1, creating a 92mm x 92mm ±0.1mm opening into which the XL4 may be installed.
PAGE 3
MAN0963-07EN Specifications / Installation DC Input / Frame CAN Torque rating 4.5 – 7 Lb-In (0.50 – 0.78 N-m) Locking Spring-Clamp, Two-terminators Per Conductor Torque rating 4.5 Lb-In (0.50 N-m) DC- is internally connected to I/O V-, but is isolated from CAN VA Class 2 power supply must be used.
PAGE 4
MAN0963-07EN Specifications / Installation 7 Built-in I/O (Model 2, 3, 4 & 5) All XL4 models (except the HE-XCE0) feature built-in I/O. The I/O is mapped into OCS Register space, in three separate areas – Digital/Analog I/O, High-Speed Counter I/O, and High-speed Output I/O. Digital/Analog I/O location is fixed starting at 1, but the High-speed Counter and High-speed Output references may be mapped to any open register location.
PAGE 5
MAN0963-07EN Specifications / Installation Model 3 & Model 4 I/O The XL4 model 3 (HE-XC1E3) features 12 DC Inputs, 12 DC outputs, and 2 Analog Inputs. The XL4 model 4 (HE-XC1E4) increases the I/O count up to 24 DC Inputs, and 16 DC Outputs and 2 Analog Inputs. The DC Inputs are 12/24Vdc compatible, and can be jumpered for Positive Logic (sinking), or Negative Logic (sourcing). Four of the inputs (H1-H4) can be used for high-speed functions up to 500kHz.
PAGE 6
MAN0963-07EN Specifications / Installation Model 5 I/O The XL4 model 5 (HE-XC1E5) features 12 DC Inputs, 12 DC outputs, with high performance, highly configurable Analog Inputs (2) and Analog Outputs (2). , The DC Inputs are 12/24Vdc compatible, and can be jumpered for Positive Logic (sinking), or Negative Logic (sourcing). Four of the inputs (H1-H4) can be used for high-speed functions up to 500kHz. The 12/24VDC Outputs feature Electronic Short Circuit protection, and support currents up to 0.