Instruction Manual

MAN0886-04-EN Specifications / Installation
__________________________________________________________________________________________________________________________________________________________________
3/2/2010 Page 1 of 6 #1037
1 Specifications
Specifications
Digital DC Inputs XL103 XL104 Digital DC Outputs XL103 XL104
Inputs per Module
12 including 4 configurable
HSC inputs
24 including 4
configurable HSC
inputs
Outputs per Module
12 including 2 configurable
PWM outputs
16 including 2 configurable
PWM outputs
Commons per Module 1 Commons per Module 1
Input Voltage Range 12 VDC / 24 VDC Output Type Sourcing / 10 K Pull-Down
Absolute Max. Voltage 35 VDC Max.
Absolute Max.
Voltage
28 VDC Max.
Input Impedance
10 kΩ
Output Protection Short Circuit
Input Current
Positive Logic Negative Logic
Max. Output Current
per point
0.5 A
Upper Threshold 0.8 mA -1.6 mA Max. Total Current
4 A Continuous
Lower Threshold 0.3 mA -2.1 mA
Max. Output Supply
Voltage
30 VDC
Max Upper Threshold 8 VDC
Minimum Output
Supply Voltage
10 VDC
Min Lower Threshold 3 VDC
Max. Voltage Drop at
Rated Current
0.25 VDC
OFF to ON Response 1 ms Max. Inrush Current 650 mA per channel
ON to OFF Response 1 ms Min. Load None
HSC Max. Switching Rate
10 kHz Totalizer/Pulse,Edges
5 kHz Frequency/Pulse,Width
2.5 kHz Quadrature
OFF to ON Response 1 ms
Analog Inputs, Medium
Resolution
XL103 XL104
ON to OFF Response 1 ms
Number of Channels 2 2
Output
Characteristics
Current Sourcing (Pos logic)
General Specifications
Input Ranges
Safe input voltage range
Input Impedance
(Clamped @ -0.5 VDC to 12
VDC)
0 - 10 VDC
0 – 20 mA
4 – 20 mA
-0.5 V to +12V
Current Mode:
100 Ω
Voltage Mode:
500 k Ω
Required Power
(Steady State)
500 mA @ 24 VDC
Required Power (Inrush)
30 A for 1 ms @ 24 VDC – DC Switched
2.5 A for 4 ms @ 24 VDC - AC Switched
Nominal Resolution
%AI full scale
Max. Over-Current
10 Bits
32,000 counts
35 mA
Primary Power Range 10 – 30 VDC
Conversion Speed All channels converted once per ladder scan Relative Humidity 5 to 95% Non-condensing
Max. Error at 25°C (excluding
zero)
4-20 mA 1.00%
0-20 mA 1.00%
0-10 VDC 0.50%
Operating Temperature
-10°C to +60°C
Terminal Type Screw Type,5 mm Removable
Additional error for
temperatures other than 25°C
TBD
CE
UL
USA:
http://www.heapg.com/Pages/TechSupport/ProductCert.html
Europe:
http://www.horner-apg.com/en/support/certification.aspx
Filtering
160 Hz hash (noise) filter
1-128 scan digital running average filter
Weight 26.5 oz. (.751 kg)
Clock Accuracy
+/- 35 ppm maximum at 25° C
(+/- 1.53 Minutes per Month)
Display Properties
Display Type 5.7” QVGA TFT
Display Life Minimum 40000 hours (50% brightness, 25 deg C)
Display Size 5.7” 5.7”
User Keys 5 user-defined Function keys and a System Key
Display Screen Dimension 320 x 240
Screens supported 1023
Display Memory 2.75 MB
Colors 32768/ 16 shade Grey scale (XL6M models only)
Connectivity
Serial Ports 2 Serial Ports – RS232 & RS485
Ethernet 10/100-Mbps (XL6e models only)
USB USB Networking Port for communication with PCs and programming Port
Removable Media Removable Media for upto 2 GB of storage for programs, data logging or screen capture
Smartstix Remote IO modules communicating on CAN
Note: Highest usable frequency for PWM output is 65 KHz
XL6/XL6M/XL6e OCS Models
HE-XL103 / HE-XL1M3 / HEXT350C113 /
HEXT280C113
HE-XL1E3 / HEXT351C113
Digital DC Inputs / 12 Digital Outputs
2 Analog Inputs (Medium Resolution)
XL6/XL6M/XL6e OCS Models
HE-XL104 / HE-XL1M4 / HEXT350C114 /
HEXT280C114
HE-XL1E4 / HEXT351C114
24 Digital DC Inputs / 16 Digital Outputs
2 Analog Inputs (Medium Resolution)