Instruction Manual

MAN0886-04-EN Specifications / Installation
__________________________________________________________________________________________________________________________________________________________________
3/2/2010 Page 3 of 6 #1037
4 Ports and Connectors
To Remove I/O Cover:
Unscrew 4 screws located on the
cover.
Remove cover.
CAUTION:
Do not over tighten
screws when replacing the back
cover.
I/O Jumpers:
I/O Jumpers (JP
) are located internally.
To access, remove I/O cover of unit.
Wiring Connectors (J1 / J2 / J3 / J4)
and I/O Jumpers (JP1 and JP3) are
described in the Wiring and Jumpers
section of this document.
USBA: For flash drive connectivity
USBB:
For network communication and
programming of OCS
Removable Memory: Uses
Removable Memory for data logging,
screen captures, program loading and
recipes. Horner Part No.: HE-MC1
Serial Communications: MJ1/MJ2:
(RS-232 / RS-485) Use for Cscape
programming and Application-Defined
Communications.
Ethernet: Used for Cscape
programming and Application-Defined
Communications.