Owner manual

ManualsBrandsHorner APG ManualsSensorsXL7 OCS

Specifications/Installation

MAN0971-02-EN

Cutout tolerance to meet NEMA standards

is ±0.005” (0.1mm). Max. Panel Thickness is 5mm.

XL7 OCS Datasheet for

HE-XW1E0, HE-XW1E2, HE-XW1E3, HE-XW1E4, HE-XW1E5

HEXT391C100, HEXT391C112, HEXT391C113, HEXT391C114, HEXT391C115

1. Specifications

2. Dimensions & Panel Cutout

General Specifications

Control & Logic Specifications

Required Power

(Steady state)

170mA @ 24VDC Control Language Support

Advanced Ladder Logic

Full IEC 1131-3 Languages

Required Power

(Inrush)

7A for <1 ms @ 24 VDC

DC Switched

Logic Program Size

& Logic Scan Rate

1MB, maximum

0.013mS/K

Primary Power Range

10–30VDC

Online Programming Changes

Supported in Advanced Ladder

Relative Humidity

5 to 95% Non-condensing

I/O Support

Digital Inputs

2048

Clock Accuracy

+/- 20 ppm maximum at 25

(+/- 1 Minutes per Month)

Digital Outputs

2048

Analog Inputs

512

Surrounding Air Temp

-40°C to +60°C

Analog Outputs

512

Storage Temp

-40°C to +60°C

General Purpose Registers

50,000 (words) Retentive

16,384 (bits) Retentive

16,384 (bits) Non-retentive

Weight

2lb. (without I/O)

UL / CE

USA: http://www.heapg.com/Pages/TechSupport/ProductCert.html

Europe: http://www.horner-apg.com/en/support/certification.aspx

Display Specifications

Connectivity

Display Type 7” TFT Transmissive Color

Serial Ports

1 RS-232 & 1 RS-485 on first Modular Jack (MJ1/2)

1 RS-232 or 1 RS-485 on second Modular Jack (MJ3)

Resolution

800x480

USB mini-B

USB 2.0 (480MHz) Programming & Data Access

Color

16-bit (65,535)

USB A

USB 2.0 (480MHz) for USB FLASH Drives (2TB)

Screen Memory

27 MB

CAN

Remote I/O, Peer-to-Peer Comms, Cscape

User-Programmable Screens 1023 Ethernet

10/100 Mb (Auto-MDX), Modbus TCP C/S, HTTP, FTP,

SMTP, Cscape, Ethernet IP

Backlight

LED – 50,000 hour life

Remote I/O

SmartRail, SmartStix, SmartBlock, SmartMod

Screen Update Rate

User Configurable within the scan time.

(perceived as instantaneous in many cases)

Removable

Memory

MicroSD, support for 32GB max.

Application Updates, Datalogging, more

Input / Output Specifications

Model DC In

Out

Relays HS In HS Out mA/V In

mA/V

RTD/Tc

mA/V

Out

High-Speed Counters

Number of Counters

Model 2

Maximum Frequency

500 kHz each

Model 3

Accumulator Size

32-bits each

Model 4

Modes Supported

Model 5

Totalizer

Quadrature

There are 4 high-speed inputs of the total DC Inputs. There are 2 high-speed outputs of the total DC

outputs. Model 2, 3 & 4 feature 12-bit Analog I/O. Model 5 features 14/16-bit Analog I/O. High-speed

Outputs can be used for PWM and Pulse Train Outputs, currently limited to <65kHz.

Pulse Measurement

Frequency

Measurement

2 Position Controlled Outputs

1 ON/OFF Setpoint per Output

Page 1 of 7

Summary of content (7 pages)

PAGE 1
Specifications/Installation MAN0971-02-EN XL7 OCS Datasheet for HE-XW1E0, HE-XW1E2, HE-XW1E3, HE-XW1E4, HE-XW1E5 HEXT391C100, HEXT391C112, HEXT391C113, HEXT391C114, HEXT391C115 1. Specifications General Specifications Required Power (Steady state) Required Power (Inrush) Primary Power Range Relative Humidity 170mA @ 24VDC 7A for <1 ms @ 24 VDC DC Switched 10–30VDC 5 to 95% Non-condensing +/- 20 ppm maximum at 25° C (+/- 1 Minutes per Month) -40°C to +60°C -40°C to +60°C 2lb.
PAGE 2
Specifications/Installation MAN0971-02-EN 3. Installation Procedures 1. Carefully locate an appropriate place to mount the XL7. Be sure to leave enough room at the top of the unit for insertion and removal of the microSD card. Also leave enough room at the bottom for the insertion and removal of USB FLASH drives 2. Carefully cut the host panel per the diagram on Page 1, creating a 189.7mm x 131.2mm ±0.1mm opening into which the XL7 may be installed.
PAGE 3
Specifications/Installation MAN0971-02-EN Page 3 of 7
PAGE 4
Specifications/Installation MAN0971-02-EN 5. Safety WARNING: Only qualified electrical personnel familiar with the construction and operation of this equipment and the hazards involved should install, adjust, operate, or service this equipment. Read and understand this manual and other applicable manuals in their entirety before proceeding. Failure to observe this precaution could result in severe bodily injury or loss of life.
PAGE 5
Specifications/Installation MAN0971-02-EN 8. Built-in I/O (Model 2, 3, 4 & 5) All XL7 models (except the HE-XW1E0) feature built-in I/O. The I/O is mapped into OCS Register space, in three separate areas – Digital/Analog I/O, High-Speed Counter I/O, and High-speed Output I/O. Digital/Analog I/O location is fixed starting at 1, but the Highspeed Counter and High-speed Output references may be mapped to any open register location.
PAGE 6
Specifications/Installation MAN0971-02-EN Model 3 & 4 – I/O The XL7 model 3 (HE-XW1E3) features 12 DC Inputs, 12 DC outputs, and 2 Analog Inputs. The XL7 model 4 (HE-XW1E4) increases the I/O count up to 24 DC Inputs, and 16 DC Outputs and 2 Analog Inputs. The DC Inputs are 12/24Vdc compatible, and can be jumpered for Positive Logic (sinking), or Negative Logic (sourcing). Two of the inputs (H1-H2) can be used for high-speed functions up to 500kHz.
PAGE 7
Specifications/Installation MAN0971-02-EN Model 5 – I/O The XL7 model 5 (HE-XW1E5) features 12 DC Inputs, 12 DC outputs, with high performance, highly configurable Analog Inputs (2) and Analog Outputs (2). , The DC Inputs are 12/24Vdc compatible, and can be jumpered for Positive Logic (sinking), or Negative Logic (sourcing). Two of the inputs (H1-H2) can be used for high-speed functions up to 500kHz. The 12/24VDC Outputs feature Electronic Short Circuit protection, and support currents up to 0.