User Manual

XL7 User Manual
Configuration – The configuration for the IP Address, Net Mask, or the Gateway will be assigned using
the value in the Default Settings in this window.
Register – The configuration for the IP Address, Net Mask, or the Gateway will be assigned using the
values in the registers assigned.
Ethernet Module Protocol Configuration
The Protocol Support area contains a list of all the protocols supported by the platform being
configured. To activate a protocol, check its checkbox.
For protocols that require additional configuration, click on a listed protocol to select it and then click
the Configure Selected Protocol button. This will open a new dialog with configuration options for the
selected protocol.
For detailed information on individual protocol configuration refer latest version of ETN 300 Manual
SUP0740
Page 31 of 110