Installation guide

WMM

This page allows users to activate the WMM function for this device. Please note that this function

only works while connecting to a WMM compatible device.

Items Information

WMM Enable Enable Wi-Fi Multi-Media.

WMM - Power Save Enable Enable WMM Power Save. Please enable WMM before

configuring this function.

Direct Link Setup Enable Enable DLS (Direct Link Setup). Please enable WMM before

configuring this function.

MAC Address Fill in the blanks of Direct Link with MAC Address of STA.

Timeout Value Time of

automatically disconnect after some seconds. The

value is integer. The integer must be between 0~65535. It

represents that it always connects if the value is zero.

Default value of Timeout Value is 60 seconds.

Apply / Tear Down After fill in the "MAC Address" and "Timeout Value", click

"Apply"

button to save your configuration. The result will

appear in the blanks. To remove the configuration, please

select the configuration in the blanks and then click "

ear

Down" button.

WPS

WPS Configuration: The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to

simplify the security setup and management of Wi-Fi networks. This adapter supports the

configuration setup using PIN configuration method or PBC configuration method through an

internal or external Registrar.